Models
>
JN322*02
JN322*02 General Electric Range Hood
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for JN322*02
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from Lynn, MA
- Parts Used:
- WB24X5166
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Lamp switch would not return to original position rendering the switch inoperable.
Remove 6 screws that hold the light and fan filter in place. Remove the four bolts that hold the control panel. Remove the four screws that hold the circuit board to the control panel. Disconnect the wires to the switch. Replace switch and reverse the disassembly procedure.
Was this instruction helpful to you?
Thank you for voting!