Models
>
JVM1350SY01
JVM1350SY01 General Electric Microwave
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for JVM1350SY01
Viewing 2 of 2
Manuals & Guides for JVM1350SY01
Click to downloadKeep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Apr 11
$259.92
This magnetron uses electrical and magnetic currents in order to create an intense heat output.
In Stock
Order now and your part arrives by Apr 11
This mounting plate is used to mount the microwave to the wall.
No Longer Available
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for JVM1350SY01
Viewing 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Kristofer from Wayne, PA
- Parts Used:
- WB15X10020
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Microwave Door Handle Broken
This repair is simple if you know what needs to be done. In my particular case, only the top screw was exposed from the inside of the microwave door. In order to get to the bottom screw, I had to pry the thin, rectangular trim away from the door. A thin, hard pry blade works good for this. Once you get one corner free, the rest of it
... Read more
pulls off pretty easily. I removed both screws, replaced the handle with the new one and secured the new one with the old screws. The new handle does NOT come with new screws, so you will need to buy new ones if you don't have the screws from the previous handle. Overall, it was a very simple fix worth doing yourself.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bernadette from Arlington, MA
- Parts Used:
- WB15X10020
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken Handle
I removed the screw from top. I pried of the edge with the casing with the flat end of a screwdriver. I removed the bottom screw. I then put the new handle in place and screwed it in place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BART from MASSAPEQUA PARK, NY
- Parts Used:
- WB15X10020
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken handle at lower screw
Opened door, partially removed inner frame holding window in place by carefully sliding a small putty knife along outer edge of frame.This was the key to get to lower screw. This frame is held in place by plastic nubs on frame.. Be careful.
Removed upper and lower screws holding handle and replaced old handle with new one using sa ... Read more me screws. Reset frame by gently pushing it back in place.
Removed upper and lower screws holding handle and replaced old handle with new one using sa ... Read more me screws. Reset frame by gently pushing it back in place.
Read less
Was this instruction helpful to you?
Thank you for voting!