Models
>
0K1043PMNL
0K1043PMNL (0K1043) Generac Generator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 0K1043PMNL
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Apr 12
In Stock
Order now and your part arrives by Apr 12
In Stock
Order now and your part arrives by Apr 12
$59.67
This part is an OEM from Generac for use with Pressure Washers and Generators. The ignition coil attaches on the side of the flywheel and produces the electrical charge to the spark plug. The most com...
In Stock
Order now and your part arrives by Apr 12
This is a genuine replacement part sourced from the Generac manufacturer. The assy, recoil starter 212CC is compatible with some small engines. This item is constructed of intricate metal parts and co...
In Stock
Order now and your part arrives by Apr 12
In Stock
Order now and your part arrives by Apr 12
In Stock
Order now and your part arrives by Apr 12
In Stock
Order now and your part arrives by Apr 12
In Stock
Order now and your part arrives by Apr 12
In Stock
Order now and your part arrives by Apr 12
In Stock
Order now and your part arrives by Apr 12
On Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Stanton from PHILPOT, KY
- Parts Used:
- 0J35220153
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
No spark. rotted high tension spark plug wire
Removed the machines face plate by drilling out the push pins, removed the air filter assembly. removed throttle linkage, removed anchors of the spark wire from motor housing, removed the recoil start assembly. removed the bolts holding the coil assembly. installed the new coil assembly and placed business card between the coil and the ma
... Read more
gnetic section of the flywheel to secure the proper gap.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Read less
Was this instruction helpful to you?
Thank you for voting!