Models
>
LP3250-6000-0
LP3250-6000-0 Generac Generator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for LP3250-6000-0
Viewing 11 of 11
Keep searches simple, eg. "belt" or "pump".
$53.20
This is a genuine OEM part that has been sourced directly from Generac. This pneumatic wheel has a diameter of 9.5 inches, and it is a replacement for the wheel on your generator. This high traction r...
On Order
$44.76
This is a genuine OEM sourced component which is specially designed for Generac portable generators. It is an identical replacement for a faulty or missing 120V outlet that was originally installed on...
In Stock
Order now and your part arrives by Apr 13
This is an authentic replacement part manufactured for use with Generac generators. The snap button is commonly used to secure the handle to the handle bracket. This snap button is available as an ind...
In Stock
Order now and your part arrives by Apr 13
This part is an OEM sourced directly from the manufacturer for use in Generac generators. The cap nut attaches to the panel rail back. It might require a wrench to replace this part if it becomes brok...
In Stock
Order now and your part arrives by Apr 13
In Stock
Order now and your part arrives by Apr 13
$15.89
This is a genuine manufacturer-sourced replacement axle pin. It is specially designed to secure the wheel on Generac portable generators. It is an identical replacement for a missing or a damaged hard...
In Stock
Order now and your part arrives by Apr 13
In Stock
Order now and your part arrives by Apr 13
$59.67
This part is an OEM from Generac for use with Pressure Washers and Generators. The ignition coil attaches on the side of the flywheel and produces the electrical charge to the spark plug. The most com...
In Stock
Order now and your part arrives by Apr 13
On Order
In Stock
Order now and your part arrives by Apr 13
In Stock
Order now and your part arrives by Apr 13
$65.42
This is an authentic OEM sourced replacement recoil cover assembly which is specially designed for use with Generac portable generators. It is the component which allows a user to pull-start the engin...
In Stock
Order now and your part arrives by Apr 13
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Stanton from PHILPOT, KY
- Parts Used:
- 0J35220153
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
No spark. rotted high tension spark plug wire
Removed the machines face plate by drilling out the push pins, removed the air filter assembly. removed throttle linkage, removed anchors of the spark wire from motor housing, removed the recoil start assembly. removed the bolts holding the coil assembly. installed the new coil assembly and placed business card between the coil and the ma
... Read more
gnetic section of the flywheel to secure the proper gap.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.
Read less
Was this instruction helpful to you?
Thank you for voting!