Models > SGIGGH1

SGIGGH1 (09) Gaggenau Dishwasher

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Check Valve – Part Number: 00165262
$10.95
In Stock
Order now and your part arrives by Jul 17
Dishrack Stopper Kit – Part Number: 00165254
$13.57
This kit includes both the front and rear stopper.
In Stock
Order now and your part arrives by Jul 17
CUTLERY BASKET – Part Number: 00093046
$52.75
This Bosch silverware basket organizes cutlery in the dishwasher for better cleaning. It includes compartments and a handle, is made of durable plastic, and measures roughly 9.9" x 5.9" x 8". Compatib...
In Stock
Order now and your part arrives by Jul 17
Float Switch – Part Number: 00165256
$28.55
This float switch is a replacement sensing component designed to detect water levels and prevent overflow conditions. It helps regulate operation safely and is commonly replaced when switches stick, f...
In Stock
Order now and your part arrives by Jul 17
MOUNTING SET – Part Number: 00088403
$18.65
Special Order
Dishwasher Sealing – Part Number: 00151866
$12.38
In Stock
Order now and your part arrives by Jul 17
SWITCH – Part Number: 00069796
$23.05
In Stock
Order now and your part arrives by Jul 17
LATCH – Part Number: 00165253
No Longer Available
PUMP-DRAIN – Part Number: 00165261
$127.60
Special Order
SHEET – Part Number: 00114294
$45.05
On Order
HOLDER – Part Number: 00165252
No Longer Available
KNOB – Part Number: 00162283
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for SGIGGH1

Viewing 2 of 2
Not draining
Fixed by these parts
Fixing
How to fix it
Will not fill with water
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Bruce from MOUNT VERNON, WA
Parts Used:
00165262
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
dishwasher not draining
I used a wet vac to remove the water from the dishwasher. remove cover and filter/strainer from bottom of dishwasher. remove screw which allows you to lift the plastic piece to access check valve. Original check valve looked like new , I installed new check valve re installed parts . Job done and issue resolved .
14 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from WEBSTER, TX
Parts Used:
00165253
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Replace catch for door latch
Dishwasher door won’t stay closed. Upon inspection, the metal striker/catch at the top of the door was broken. This dishwasher is 12 years old and this is the first problem I’ve had with it. To repair the catch, first remove screws holding cover plate at the bottom of the door. Next, remove screws holding the dishwasher stable from und er the counter. The pull out the dishwasher to gain access to the catch. You’ll have to take a small set of pliers and bend the two tabs back that hold the catch in place. Lift the catch up and forward to remove. Replace and bend the tabs back to hold the new catch securely. Move the dishwasher back in place and secure with the screws previously removed. Put the cover plate back in place and you’re done.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ranaye from BECKER, MN
Parts Used:
00165256
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Not getting water
shut off water, pull dishwasher out, took side insulation off, unhooked what was connected to the float switch and replaced the new with the old. Reconnected everything and put insulation back and wa-la , all done
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More