Models
>
867747980
867747980 Kenmore Furnace
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Jul 30
In Stock
Order now and your part arrives by Jul 30
Special Order
Special Order
Special Order
Special Order
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Michael from Chevy Chase, MD
- Parts Used:
- 12001154
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
not draining at end of cycle
First I dismantled the impellers that drive the wash and drain water to see if they were damaged or clogged - I knew the drain hose was not clogged. It seems you can' remove the wash impeller without breaking it..... at least I couldn't.
Since they were ok [i replaced the wash impeller that I broke], it seemed the only other thing ... Read more could be the timer switch. I replaced it and all was fine again. It replaces by removing the plastic INSIDE panel of the door and quite easily after that.
Since they were ok [i replaced the wash impeller that I broke], it seemed the only other thing ... Read more could be the timer switch. I replaced it and all was fine again. It replaces by removing the plastic INSIDE panel of the door and quite easily after that.
Read less
Was this instruction helpful to you?
Thank you for voting!