Models > FGC30S4ASA

FGC30S4ASA Frigidaire Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for FGC30S4ASA

Viewing 4 of 4
BURNER Diagram and Parts List for Frigidaire Cooktop
BURNER
COOKTOP Diagram and Parts List for Frigidaire Cooktop
COOKTOP
COVER Diagram and Parts List for Frigidaire Cooktop
COVER
WIRING DIAGRAM Diagram and Parts List for Frigidaire Cooktop
WIRING DIAGRAM

Manuals & Guides for FGC30S4ASA

Click to download
Install
Installation Instructions
(0.46MB)
Manual
Owner's Manuals
(1.12MB)
Manual
Owner's Manuals
(2.59MB)
Specs
Product Specifications Sheet
(0.04MB)
Wiring
Wiring Diagram
(0.57MB)
Keep searches simple, eg. "belt" or "pump".
BLACK BURNER CAP KI – Part Number: 5304507219
This burner cap kit includes 5 black burner caps. The caps sit on top of the burner head. This part helps spread out the burner flame for even heating and protects the burner head from spills.
No Longer Available
Spark Module – Part Number: 316135702
$94.31
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
In Stock
GRATE BURNER – Part Number: 318937101
Kit of 4.
No Longer Available
Burner Igniter – Part Number: 318148700
$46.45
Also known as spark electrode. This part helps your burner ignite and produce flame.
In Stock
Igniter Switch – Part Number: 316032002
$55.82
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
Special Order
Bushing – Part Number: 318146301
No Longer Available
Square Drip Pans - Set of 4 - White – Part Number: 318536709
White in color. Set of 4.
No Longer Available
Gas Pressure Regulator – Part Number: 5308007974
$250.69
***No Conversion Kit Required - Adjust On Appliance*** This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.
In Stock
Medium Burner Base – Part Number: 318148001
$91.99
In Stock
LP Gas Conversion Kit – Part Number: 318127414
No Longer Available
BURNER – Part Number: 318148002
No Longer Available
TUBE – Part Number: 318167801
$72.95
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for FGC30S4ASA

Viewing 2 of 2
Will Not Start
Fixed by these parts
Fixing
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Duff from Buena Vista, CO
Parts Used:
316032002
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
gas ignitor continued to run after turned on or off
Removed all of the grates, control knobs and gas diffusers. Unscrew the drip pans, two on each pan, which attach the pans to the gas supply. Raised the drip pans from the top and unplugged the ignitors from all pans. Remove the top and the rubber deflector over the ignitor switch. The ignitor switch snaps off and on. One of the seals unde r the drip pan was broken and needed replaced. I would recommend ordering these also. Turned out this was a good time to give everything a goo cleaning then replace as removed.
Read less
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Earl from ALLIANCE, OH
Parts Used:
316135702
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Top burners were not lighting without a match
Was easy...I pulled oven out from the wall so I could get to the back.i used a nut driver to remove small silver cover.matched up wires to the never module and re installed.pluged oven back in and burners lit perfectly
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Wayne from Palestine, IL
Parts Used:
316135702
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
burner ingnighter would not lite burner
Replaced the ingintion module, still did not work, replaced the burner complete with new ingiter , it now works but another one quit . the front right one has 5 ohms resistance ,replaced with new one with 0 ohms, the back left has 2 ohms resistance and now it does not work , will need to replace that burner allso. too bad you can't buy ju st the spark module for the burner.
Read less
30 of 86 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More