Models > FEC3X7XAB5

FEC3X7XAB5 Frigidaire Cooktop

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for FEC3X7XAB5

Viewing 4 of 4
CONTROL PANEL Diagram and Parts List for Frigidaire Cooktop
CONTROL PANEL
COVER Diagram and Parts List for Frigidaire Cooktop
COVER
MAINTOP / ELEMENTS Diagram and Parts List for Frigidaire Cooktop
MAINTOP / ELEMENTS
WIRING DIAGRAM Diagram and Parts List for Frigidaire Cooktop
WIRING DIAGRAM
Keep searches simple, eg. "belt" or "pump".
Dual Infinite Switch Kit – Part Number: 903057-9010
$132.24
This switch controls the stove top surface burner.
Special Order
ELEMENT – Part Number: 318198834
$185.49
In Stock
Order within the next 12 hrs and your part ships today!
Radiant Surface Element - Dual 1000W/2000W – Part Number: 318198923
No Longer Available
Control Knob - Black – Part Number: 318164505
Sold individually.
No Longer Available
Hex Nut – Part Number: 5303013272
$14.79
Special Order
Bushing – Part Number: 318148900
No Longer Available
SCREW – Part Number: 5303300265
$12.00
In Stock
Order within the next 12 hrs and your part ships today!
SCREW – Part Number: 5303323137
$11.03
Special Order
SCREW – Part Number: 5303297477
$12.00
Special Order
DISCONTINUED – Part Number: 5304407358
No Longer Available
LAMP – Part Number: 5303297484
No Longer Available
KNOB-SURFACE UNIT – Part Number: 5303310867
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for FEC3X7XAB5

Viewing 1 of 1
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Neil from Jessup, PA
Parts Used:
318198834
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
rf burner was not working
First I removed 2 screws that held the stove top in place. Raised the stove top and support it. Then, I removed the hold down spring for the burner and removed three wires from the old burner. I found that the connector on the white wire was spread open too much so I crimped it closed for a better fit on the terminal. I reattached the thr ee wires, put the hold down spring back in place, lowered the stove top and installed the 2 screws. JOB DONE
Read less
34 of 48 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More