Models
>
FCRE3052BWB
FCRE3052BWB Frigidaire Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for FCRE3052BWB
Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
The 6” radiant cooking element with limiter fits under the glass cooktop and supplies heat to the cooking area. If your element is not heating, you can test the element for continuity with a multimete...
In Stock
Order now and your part arrives by Apr 16
In Stock
Order now and your part arrives by Apr 16
$53.58
This range terminal block kit provides a secure connection point between the household power cord and the appliance’s internal wiring. It helps distribute electrical power safely and reliably to the r...
In Stock
Order now and your part arrives by Apr 16
In Stock
Order now and your part arrives by Apr 16
In Stock
Order now and your part arrives by Apr 16
In Stock
Order now and your part arrives by Apr 16
$61.55
This single infinite control switch regulates power to one surface burner on an electric range or cooktop, allowing you to adjust and maintain precise cooking temperatures. Unlike a basic on/off switc...
In Stock
Order now and your part arrives by Apr 16
In Stock
Order now and your part arrives by Apr 16
$58.37
This switch activates specific appliance functions. Wear can lead to intermittent performance or failure to engage. Replacement restores reliable operation.
In Stock
Order now and your part arrives by Apr 16
In Stock
Order now and your part arrives by Apr 16
Special Order
$48.21
This probe is a replacement sensing component used to monitor internal temperatures or operating conditions. It is commonly replaced when readings become inaccurate or system performance is affected by faulty sensing.
In Stock
Order now and your part arrives by Apr 16
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for FCRE3052BWB
Viewing 2 of 2Element will not heat
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Lori from Winter Haven, FL
- Parts Used:
- 318178110
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
burned out burner
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the differ
... Read more
ent sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- German from SELLERSBURG, IN
- Parts Used:
- 5304533520
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
Center of dual burner was broken
Removed screws on the sides and front.
Labeled the wire sets connected to the front control panel.
Gently lifted up the stove top and flipped it over on to a towel.
Removed the piece of metal holding down the burner.
Disconnected the cables to the old burner.
Repeated steps above in reverse.
Labeled the wire sets connected to the front control panel.
Gently lifted up the stove top and flipped it over on to a towel.
Removed the piece of metal holding down the burner.
Disconnected the cables to the old burner.
Repeated steps above in reverse.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ruth from MORGANTOWN, WV
- Parts Used:
- 318178110
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
2 elements stopped working.
My husband followed the video instructions and it was easy to fix.
Was this instruction helpful to you?
Thank you for voting!