Models > EH155FXTQ01

EH155FXTQ01 Whirlpool Freezer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for EH155FXTQ01

Viewing 4 of 4

Manuals & Guides for EH155FXTQ01

Click to download
Keep searches simple, eg. "belt" or "pump".
$20.79
This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...
In Stock
Order within the next 4 hrs and your part ships today!
In Stock
Order within the next 4 hrs and your part ships today!
In Stock
Order within the next 4 hrs and your part ships today!
No Longer Available
$67.88
In Stock
Order within the next 4 hrs and your part ships today!
$167.48
On Order
This is the mechanics (motor/engine) of the cooling system. It kicks in whenever the thermostat demands cooling. ***NOTE: This part needs to be installed by a trained professional in appliance repa...
In Stock
Order within the next 4 hrs and your part ships today!
This part provides added protection for the compressor motor because it protects against excessive current and excessive temperature use.
In Stock
Order within the next 4 hrs and your part ships today!
$12.60
In Stock
Order within the next 4 hrs and your part ships today!
This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.
In Stock
Order within the next 4 hrs and your part ships today!
Special Order
The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
No Longer Available

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Howard from Boynton Beach, FL
Parts Used:
350930
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Both outside door handles turned very beige
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol oring refer handles. Thank you
22 of 50 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Henry from Monrovia, CA
Parts Used:
W10917237
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
light switch metal was corroaded by the moisture. there was no contact so light wouldnot turn on.
pulled switch from door ,unpluged it and then plued in new switch.
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
richard from galena, KS
Parts Used:
WP2214067
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Overload was open
New part was similar, except contact blade was for a full 1/4", my model utilizes 1/8". So I cut the blade in half with a hacksaw, filed off the rough edges and reassemblied the connector; attached it to the compressor
Now being a retired electronic engineer; who's great idea was it to hide a klixon inside the connector?
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!