Models
>
EH150FXWN00
EH150FXWN00 Whirlpool Freezer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for EH150FXWN00
Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers,...
In Stock
Order now and your part arrives by Jul 30
In Stock
Order now and your part arrives by Jul 30
In Stock
Order now and your part arrives by Jul 30
$173.35
This door gasket forms a tight seal to keep heat or cold contained while preventing air and moisture leaks. A proper seal improves efficiency and helps maintain consistent internal conditions. Replaci...
In Stock
Order now and your part arrives by Jul 30
$45.00
This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.
In Stock
Order now and your part arrives by Jul 30
In Stock
Order now and your part arrives by Jul 30
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- James from Paden City, WV
- Parts Used:
- 4356323
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable)
freezer wasn't cooling
Unpluged the freezer
Removed the knob from the thermostat.
Removed the nut securing the thermostat
Removed the wires from the thermostat
Removed the sensing bulb from the bottom of the freezer by sliding it out, after marking with tape to get the insertion length.
Secured the new thermostat with the new nut ... Read more and threaded the new sensing bulb thru the plastic loops and inserted it 15 inches into its holder.
Snapped the wiring back on the thermostat and plugged freezer back in.
Removed the knob from the thermostat.
Removed the nut securing the thermostat
Removed the wires from the thermostat
Removed the sensing bulb from the bottom of the freezer by sliding it out, after marking with tape to get the insertion length.
Secured the new thermostat with the new nut ... Read more and threaded the new sensing bulb thru the plastic loops and inserted it 15 inches into its holder.
Snapped the wiring back on the thermostat and plugged freezer back in.
Read less
Was this instruction helpful to you?
Thank you for voting!