Models > WFC05K0DW0

WFC05K0DW0 Westinghouse Freezer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for WFC05K0DW0

Viewing 4 of 4

Manuals & Guides for WFC05K0DW0

Click to download
Keep searches simple, eg. "belt" or "pump".
These are used to hold your gasket in place.
In Stock
Sold individually.
No Longer Available
$11.76
This is a screw and it is used with a variety of home appliances. It is less than 1/2 an inch long, and is #8-18 x 3/8. This part is a pan head, sheet metal, screw. It is made of metal.
In Stock
This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.
On Order
$14.92
This multi-use screw fits various appliances and tools such as, freezers, refrigerators, wall ovens, washers, ranges, dishwashers, dryers, microwave oven combos, combos, wine and beverage coolers. *Pl...
In Stock
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
In Stock
This part helps regulate the temperature in the freezer.
In Stock
No Longer Available
Refrigerant system filter/dryer.
In Stock
No Longer Available
This white door gasket is used to seal the freezer door when closed.
On Order
In Stock

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for WFC05K0DW0

Viewing 8 of 8
Won’t start
Fixed by these parts
Fixing Fixing
How to fix it
Frost buildup
Fixed by these parts
Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Too warm
Fixed by these parts
Fixing Fixing
How to fix it
Fridge too warm
Fixed by these parts
Fixing Fixing
How to fix it
Doesn’t stop running
Fixed by these parts
Fixing
How to fix it
Freezer section too warm
Fixed by these parts
Fixing
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Catrina from Calumet City, IL
Parts Used:
297313200
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Door wasn't closing correctly.
My husband removed the old hinge, by taking out the old screws and the old hinge and attached the new one, by inserting the new hinge and the new screws. It was as easy as 123.
16 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia from AMERICAN CYN, CA
Parts Used:
216480801
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
The freezer door gasket needed to be replaced.
When I received the new gasket I took a blow dryer to it and straightened out the warped areas prior to removing the old gasket. I then looked for a tool to remove the pins holding the gasket in place. I found a butter knife worked the best to get underneath and pry them out. Since this is a chest freezer, the pins in the back of the d oor were very hard to remove and one of them even broke off as I was removing it. Of course I had no spare pins when I went to put the new gasket in place. The new gasket slid right on and the pins snapped into place with a little bit of HARD pressure. My advice is to make sure that you do the back of the door first, since it is hard to line up the holes and the pins otherwise. It would not have been a difficult repair if not for the pins giving me trouble. There are no instructions sent showing how to do any of this work, so if you are not knowledgeable about gaskets this repair could be a difficult one. Maybe the company could include some basic instructions as a help to their customers.
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sammie from White Oak, TX
Parts Used:
216480801, 216061502
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Needed replacement because seal old and inner liner cracking
Very easy and simply. Take old stuff off, let insulation dry out and put all back together with new parts.
15 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!