RH1500RDW00 Roper Freezer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Michelle from Richardson, TX
- Parts Used:
- 72017
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Scratches in Surface
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Paden City, WV
- Parts Used:
- 4356323
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable)
freezer wasn't cooling
Unpluged the freezer
Removed the knob from the thermostat.
Removed the nut securing the thermostat
Removed the wires from the thermostat
Removed the sensing bulb from the bottom of the freezer by sliding it out, after marking with tape to get the insertion length.
Secured the new thermostat with the new nut and threaded the new sensing bulb thru the plastic loops and inserted it 15 inches into its holder.
Snapped the wiring back on the thermostat and plugged freezer back in.
Removed the knob from the thermostat.
Removed the nut securing the thermostat
Removed the wires from the thermostat
Removed the sensing bulb from the bottom of the freezer by sliding it out, after marking with tape to get the insertion length.
Secured the new thermostat with the new nut and threaded the new sensing bulb thru the plastic loops and inserted it 15 inches into its holder.
Snapped the wiring back on the thermostat and plugged freezer back in.
Was this instruction helpful to you?
Thank you for voting!