Models > 106726400

106726400 Kenmore Freezer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Cover Screw – Part Number: WP308685
$7.95
This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers,...
In Stock
Screw – Part Number: WP488729
$7.91
Metallic screw that is less than an inch long. Does not include the plastic washer.
In Stock
Hinge Washer – Part Number: WP487802
$7.95
In Stock
Screw – Part Number: WP999367
$7.95
Sold individually.
In Stock
Screw – Part Number: WP681414
$7.76
This screw is sold individually.
In Stock
Screw – Part Number: WP489128
$13.17
This screw is sold individually.
In Stock
Screw - 8-32 X 1-1/4 – Part Number: WP488163
$7.59
Sold individually.
In Stock
Door Gasket – Part Number: 2188438A
$246.79
This door gasket is used to seal the freezer door when closed.
In Stock
Thermostat Kit – Part Number: 4389248
$169.70
In Stock
Filter Drier Tube – Part Number: W10843121
$38.13
This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.
In Stock
Screw – Part Number: WPW10141625
$12.03
Sold individually.
On Order
Screw – Part Number: WP486754
$8.04
Sold individually.
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 106726400

Viewing 1 of 1
Door won’t open or close
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Vernon from Clayton, NC
Parts Used:
2188438A
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
The old door gasket was hard and frequently didn't seal and caused evaperator to ice up and contents of freezer to thaw out.
Using a nut driver on a cordless drill I took out the screws that held the metal strips on, which held the seal in place. I installed the new seal with a hand driven nut driver so as not to strip the screw holes in the door. It came out well and the new seal works very well. Getting the seal positioned properly was the most tedious par t.
Read less
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More