Models > 1988111552

1988111552 Kenmore Freezer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: WP488729
$7.30
Metallic screw that is less than an inch long. Does not include the plastic washer.
In Stock
Order now and your part arrives by Mar 19
Basket Glide – Part Number: WP594817
$9.40
Sold individually.
In Stock
Order now and your part arrives by Mar 19
Freezer Door Key – Part Number: WP842177
$7.30
Sold individually.
In Stock
Order now and your part arrives by Mar 19
Rivet – Part Number: WP596788
Sold individually.
No Longer Available
Compressor Relay/Overload Kit – Part Number: 819099
The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed. The overload provides extra protection for the compressor motor.
No Longer Available
Basket Glide – Part Number: 594816
No Longer Available
Indicator Light - Orange – Part Number: 592121
No Longer Available
Capacitor – Part Number: WP482156
$56.05
In Stock
Order now and your part arrives by Mar 19
Light Bulb – Part Number: W10873798
$16.75
In Stock
Order now and your part arrives by Mar 19
Filter Drier Tube – Part Number: W10843121
$43.21
This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.
In Stock
Order now and your part arrives by Mar 19
Thermostat Kit – Part Number: 569869
No Longer Available
Screw – Part Number: WP965173
$7.30
Sold individually.
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from Blue Springs, MO
Parts Used:
819099
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
fans and lights worked in refrigerator but not cooling
By going on line and going to PartsSelect, the check out procedures traced the problem to the start/overload relay. Using a nut driver, I removed the back panel and using their instruction, I installed the overload relay. On the next to the last step on the instruction, the sealer in the kit was already hardened. I called the service hot line at PartsSelect and they apologized and sent me another kit to finish the repair. In two days, the new kit came and the repair was complete. The whole experience with PartsSelect was great.
Read less
9 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More