Models > ZIFS360NHBLH

ZIFS360NHBLH General Electric Freezer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for ZIFS360NHBLH

Viewing 5 of 5
CABINET 1 Diagram and Parts List for General Electric Freezer
CABINET 1
CABINET 2 Diagram and Parts List for General Electric Freezer
CABINET 2
DOOR Diagram and Parts List for General Electric Freezer
DOOR
MACHINE COMPARTMENT Diagram and Parts List for General Electric Freezer
MACHINE COMPARTMENT
SHELVES DRAWERS Diagram and Parts List for General Electric Freezer
SHELVES DRAWERS
Keep searches simple, eg. "belt" or "pump".
Door Bin – Part Number: WR71X10138
$126.30
Tired of bottles tipping over in your fridge door? This sturdy replacement bin helps keep everything in place and easy to reach. With a white base and clear front, it blends seamlessly into your refri...
In Stock
Order now and your part arrives by Mar 16
Fresh Food Deep Door Bin - Right Side – Part Number: WR71X10139
$161.95
Need more room in your fridge This deep door bin is a great way to add extra storage on the right side of your refrigerator. It?s perfect for keeping jars and bottles upright and within easy reach. Ju...
In Stock
Order now and your part arrives by Mar 16
Refrigerator Door Bin - Left Side – Part Number: WR71X10140
$156.95
In Stock
Order now and your part arrives by Mar 16
Door Closure Spring – Part Number: WR01X10255
$38.06
In Stock
Order now and your part arrives by Mar 16
Inverter Compressor – Part Number: WR87X29409
$175.95
This compressor inverter control board is a genuine replacement part designed to regulate the speed of the compressor motor in select refrigerators. By adjusting compressor speed based on cooling dema...
In Stock
Order now and your part arrives by Mar 16
Water Line - 1/4" – Part Number: WR17X1948
$22.00
In Stock
Order now and your part arrives by Mar 16
DOOR GASKET SD – Part Number: WR78X20986
$125.14
In Stock
Order now and your part arrives by Mar 16
Snack Pan – Part Number: WR32X10078
$183.41
Keep your refrigerator organized and your snacks fresh with this replacement snack pan assembly. Designed to hold small food items, it features a sealed design that helps preserve freshness. This dura...
In Stock
Order now and your part arrives by Mar 16
SCREW #8 18 X 3/4 – Part Number: WR01X10050
$14.65
In Stock
Order now and your part arrives by Mar 16
SEAL FRONT SHOWCASE LID – Part Number: WR14X10040
$28.79
In Stock
Order now and your part arrives by Mar 16
R134 DRIER – Part Number: WR86X25269
$59.11
The filter dryer filters refrigerant that travels through the sealed system of the refrigerator.
In Stock
Order now and your part arrives by Mar 16
SLIDE OUTER – Part Number: WR72X10366
$45.27
In Stock
Order now and your part arrives by Mar 16
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for ZIFS360NHBLH

Viewing 3 of 3
Door won’t open or close
Fixed by these parts
Fixing
How to fix it
Leaking
Fixed by these parts
Fixing
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Carla from WARRENTON, VA
Parts Used:
WR01X10255
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
ordered new spring for refrigerator door as door would no longer swing close
Took an old flat end screw driver, used dremel to make v notch in end. Hooked spring end in notch and used leverage on screw driver to pull spring end in place.
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
RUSSELL from BLACK HAWK, SD
Parts Used:
WR17X1948
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
water line cracked
I loosened the compression nut on the valve with my fingers and pulled the water line free from the valve. On the other end, I just pulled it from the hose clamp. Installation in reverse. Force the water line into the fitting on top, Slide the old nut over the line on the bottom. Screw the nut onto the valve. Reach inside the freeze r and turn on the ice maker. Done. Before replacing the cardboard grill, you should vacuum the coils on the bottom, front and back. If practical, push it outside and blow it out with an air compressor or a leaf blower.
Read less
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edward from Jenks, AL
Parts Used:
WR17X1948
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
ice maker pump and water line leaking
I replaced both the punp and water line. the website depicting the repair parts was the best i ever worked with. The parts were high quality delivered on time and easy to install. Total job cost $30 as opposed the cost of of a service man or a new refrig.
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More