Models
>
FUF17DUARWW
FUF17DUARWW General Electric Freezer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for FUF17DUARWW
Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
This key is for freezers. If your key will not lock or unlock the freezer door, check it to see if it has been bent or damaged. If it has been damaged, you should look to replace it to avoid damaging ...
No Longer Available
On Order
The thermostat senses that the heat near the cooling coils has reached the desired temperature.
No Longer Available
In Stock
In Stock
Special Order
Special Order
In Stock
Special Order
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Hazel from FRIENDSWOOD, TX
- Parts Used:
- WR14X28402
- Difficulty Level:
- Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Gasket not sealing
Per the UTube video ...
Once the gasket was on, the door would not seal.
Gasket was removed and placed in dryer again to "soften" but to no avail on the second try.
When we received the package, the box was ripped open and only the wadded up gasket in the box. Don't know if someone just shoved it in or what. I think thi ... Read more s is what caused the issue with it not sealing. Also no instructions except on your website. We ended up putting on the original gasket and sealed the cut on the gasket with tape. Freezer seals well and no leaks or issues. I still have the gas but no clue what to do with it if we can't get it to work. Is there a refund available?
Once the gasket was on, the door would not seal.
Gasket was removed and placed in dryer again to "soften" but to no avail on the second try.
When we received the package, the box was ripped open and only the wadded up gasket in the box. Don't know if someone just shoved it in or what. I think thi ... Read more s is what caused the issue with it not sealing. Also no instructions except on your website. We ended up putting on the original gasket and sealed the cut on the gasket with tape. Freezer seals well and no leaks or issues. I still have the gas but no clue what to do with it if we can't get it to work. Is there a refund available?
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- james from las cruces, NM
- Parts Used:
- WR01X26468
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
The freezer was missing the key
I ordered a pair of new keys from Parts Select and found the website extremely easy to use. I found the key I needed in less than 10 minutes and ordered the item. The key woked perfectly. Delivery was prompt and the cost was resonable. I have bookmarked the site for future use. thank you. James
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Doug from Montgomery, TX
- Parts Used:
- WR12X10843
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Someone Pressed Too Hard On Handle
I removed the plastic caps over the top and bottom retainer screws; removed the screws; removed the broken plastic nipples; placed the new handle in the proper position; re-inserted retainer screws; snapped plastic caps back in place and was finished with the repair.
Was this instruction helpful to you?
Thank you for voting!