Models > FCM15SMAWH

FCM15SMAWH General Electric Freezer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for FCM15SMAWH

Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
$29.54
In Stock
Order within the next 4 hrs and your part ships today!
No Longer Available
$62.27
The filter dryer filters refrigerant that travels through the sealed system of the refrigerator.
In Stock
Order within the next 4 hrs and your part ships today!
No Longer Available
No Longer Available
Special Order
Connects into the Capacitor. This part boosts the compressor and shuts off as soon as the motor gets up to the required speed.
No Longer Available
No Longer Available
$13.76
Special Order
Special Order
$170.32
Special Order
Special Order

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for FCM15SMAWH

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ouida from Huntsville, AL
Parts Used:
WR24X10005
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Moldy Gasket
This freezer was given to me by a neigbor. It had set closed/unplugged for over a year. The gasket was so moldy I couldn't clean it. Unplug the freezer! I removed the old gasket pins using needle nose pliers. There were about 50 plastic pens holding the gasket and inside cover of the freezer lid (chest freezer) The plastic pens were difficult to remove. The insulation was wet so I braced the lid open and let the insulation dry for a couple of days. When the insulation was dry I attached a plastic pen at each corner of the gasket and then placed pens at even intervals around the rest of the gasket.. None of the holes lined up past the 3rd hole so I used a punch to make the necessary holes. The instructions say to put a bead of silicone gel around the outer edge of the gasket. I haven't done that yet but plan to do that last step.
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joyce from Citrus Heights, CA
Parts Used:
WR24X10005
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
freezer not keeping frost free & gasket was hard
Ordered from PartSelect, got the gasket very quickly && even has the best cost over SEARS & 3 other places. I followed the instructions in the pkg. but it may be that the freezer is too old or the lid needs to be readjusted. Who knows but would suggest this company to anyone for parts! Thanks again!P.S. it took longer than most
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!