FFC0923DW2 Frigidaire Freezer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Catrina from Calumet City, IL
- Parts Used:
- 297313200
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Door wasn't closing correctly.
My husband removed the old hinge, by taking out the old screws and the old hinge and attached the new one, by inserting the new hinge and the new screws. It was as easy as 123.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elba from Kissimmee, FL
- Parts Used:
- 216848200
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Improve space distribution
Add the new basket in the side of the original, it is easier to access items from below the baskets.
Excelent quality of the part. Thanks
Excelent quality of the part. Thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Butler, PA
- Parts Used:
- 297313200
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Socket set
Hinge Broken
Took out the screws(8mm). Used pliers to close new hinges. Re-installed the screws with as large washers as would fit(to hopefully prevent the hinges from cracking at the screw holes like the originals did). I like this supplier, part was easy to find, correct part, shipped fast, price was good.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- billy from crossville, TN
- Parts Used:
- 216848200
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
needed other storage baskets
open lid put baskets in. it should also be noted that we originally ordered two baskets and do to some ones over sight we only recieved one. We called and to our surprise the other basket was sent out that day.
If the occasion arises we would order from you again.
If the occasion arises we would order from you again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- paul from LISLE, IL
- Parts Used:
- 216502600
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
While defrosting freezer tossed the drain plug with ice and water into the sewer system.
Opened mailer and bag and place the drain plug into the drain. fit perfectly. In fact it is better than the one lost since the original needed a screwdriver or tool to remove the plug. This one has a flang or finger turner on it so that it can be removed. Also, does not interfere with items in bottom of freezer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ivan from MERLIN, OR
- Parts Used:
- 5304496559
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
freezer would not start nor cool freeze
remove 2 screws from thermostat cover on side of freezer pulled temp nob off then removed temp control and copper temp sense rod by pulling out then unhook wires then reverse procedure to put back together
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary from OSTRANDER, OH
- Parts Used:
- 297313200
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Hinge broke
I used a socket set and removed old one and replaced with new one. Easy as 1 2 3. And I'm s 55 yr old female.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bruce from WALLING, TN
- Parts Used:
- 216848200
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
part was wrong size, but looked correct using the 1 inch grid on the picture on the website
Basket was way too small and would not work even though the picture with the grid on the website looked like it was very close to the correct size.
Don't use the grid to determine whether product is the correct physical size!
Don't use the grid to determine whether product is the correct physical size!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barbara from Shaker Heights, OH
- Parts Used:
- 297013600
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Manual Defrost-Extreme heat caused ice build-up
Defrosted freezer, hose broke due to dry-rot. Used towels to let water drain into pan. Now with the plug minimal frost build-up. No ice at all. Now if I could get a new hose to drain the water that would be great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shirleen from Olivet, MI
- Parts Used:
- 297313200
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
The freezer hinge was broke.
Took the broken one off & replaced it with the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Glen from BON AQUA, TN
- Parts Used:
- 297313200
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Broken hinge
Removed the bolts and broken hinge with lid closed. Installed new hinge. Removed the retaining nail from new hinge allowing it to have tension.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dennis from COLORADO SPGS, CO
- Parts Used:
- 297313200
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Broke freezer lid hinge.
Simple fix, the new hinge fit like a glove simple R&R.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cynthia from Keystone, NE
- Parts Used:
- 297181900
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Light burned out on the door lid
Used a thin screwdriver to lift out the burned out light assembly. Unplugged the old light unit and installed the new one. Plugged in the freezer and the light worked. Easy as pie.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edward from Philadelphia, PA
- Parts Used:
- 216848200
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
wanted a third basket for the freezer
No repair. Just placed the basket in the freezer.
Was this instruction helpful to you?
Thank you for voting!
Inner lid collapsing
I popped out all the little plastic rivets for reuse with a needlenose pliers. There was a lot of ice built up in the insulation. I rested the inner lid on top of the freezer box to protect the stuff in the freezer and catch anything I might drop. I used a hair dryer to slowly melt the ice enough to extract it without losing too much insulation (this is why the job took more than 20 minutes). Once this was done, I tucked the insulation into the lid. I fit the new gasket on the new inner lid and placed it into its opening. I then started placing the rivets. I did the corners first to hold it up. I was able to push most of them by hand. For a few I used the edge of my pliers. Good as new.
Was this instruction helpful to you?
Thank you for voting!