Models > DF15BTLWHT

DF15BTLWHT Admiral Freezer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for DF15BTLWHT

Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
$20.77
This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...
In Stock
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
This screw is sold individually.
In Stock
$282.30
This gasket is used on vertical freezers. Screws are no longer included.
In Stock
$10.69
This is an OEM part sourced directly from the manufacturer. This leveling leg is commonly used with refrigerators, dryers, freezers, ranges, cooktops, and microwaves. This leveling leg ensure that you...
Special Order
$7.91
Sold individually.
In Stock
This is an OEM part sourced directly from the manufacturer. This is a bushing used in the assembly of refrigerators. This bushing is used alongside the hinge pin, and is designed for use with a ? inch...
No Longer Available
Special Order
Sold Individually.
No Longer Available
$7.15
This is an authentic OEM replacement part. This washer is used in the assembly of refrigerators; most often it is used in conjunction with the door hinge. For exact placement we recommend you refer to...
In Stock
$6.09
This screw is sold individually.
In Stock
$7.21
Special Order

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for DF15BTLWHT

Viewing 1 of 1
Frost buildup
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
LESLIE from TAPPAHANNOCK, VA
Parts Used:
WP4357099
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
gasket had harden. frost was building up quickly
the gasket peels back to reveal the approx 20 screwsholding gasket and door shelves. removed these. removed old gasket from door panel. new gasket needs to be stretched to get on door panel. align screw holes in door panel with screw holes in gasket. attached back to freezer door. this gasket did not seal securely when closing door. this gasket was installed on a cold day in a garage and may become more flexible as it warms up.
25 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
stephen from montgomery, NY
Parts Used:
W11117769
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
No leveling legs
Ordered the leveling bolts, very fast shipping, parts correct as shown. Purchased a condo by the shore, frige had no levelers, they went in smoothly & was done in no time.
Steve
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerald from TANEYTOWN, MD
Parts Used:
WP52185-1
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Pantry Drawer Cover keeps falling off, not held in place by End Cap Kit
I removed the 2 crisper drawers and the glass shelf directly above the Pantry Drawer. Removed the Pantry Drawer and Pantry Drawer cover so you have easy access to the Right-Hand End Cap. On the right-hand End Cap, there are 2 screws which hold the End Cap in place, use a 1/4 inch driver to unscrew the screws from the front of the cabine t on the End Cap and half-way in of the cabinet, leave the screws in their holes in the End Cap. Lift gently to get off a small plastic pin, and move the End Cap away from the Cabinet. You don't need to completely pull the End Cap out of the cabinet, it'll move more like a door opening. Place 2 washers on each screw and gently put the End Cap back into place, being careful NOT to jostle too much so the washers don't fall off the screws. You will need to gently lift the End Cap back in to place over the plastic pin. Hand-tighten the screws back into place with the 1/4 in driver. Remount the Pantry Drawer on the sliders. When you go to install the Pantry Drawer Cover, you will need to gently push on one of the pins to get the cover back into place. Put glass and crisper drawers back into place.

Test by gently pulling on the Pantry Drawer. If properly mounted, the pins will extend fully into the Cover and will keep it secure when opening the Pantry Drawer.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!