Models
>
GFB760V
GFB760V General Electric Food Waste Disposer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for GFB760V
Viewing 1 of 1
Manuals & Guides for GFB760V
Click to downloadInstall
Installation Instructions
(4.84MB)
Manual
Owner's Manuals
(10.21MB)
Specs
Product Specifications Sheet
(0.14MB)
Keep searches simple, eg. "belt" or "pump".
$39.58
The cushion mount forms a watertight seal between the garbage disposal neck and the mounting ring. It is made of black plastic and measures approximately 4.5 inches in diameter and is 0.125 inches thi...
In Stock
In Stock
$17.70
This is an elbow outlet and gasket for a food waste disposer or garbage disposer. This part connects the disposer to the drain pipe in your home. If you notice a blockage or a leak, you may need to re...
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for GFB760V
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Donald from Tampa, FL
- Parts Used:
- WC03X10007, WC03X10008
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
Leaky GE Disposall
Mount Ring was very difficult to remove. Hammer needed to unlock. Once removed, rubber and fiber gaskets were easily replaced. Cushion Mount did not attach properly to sink flange after many attempts, so Mount Ring was placed too high for hopper to attach. The cushion mount was finally placed on flange correctly (not sure why it attached
... Read more
incorrectly previously) but all is well with no leaks. Dishwasher hose needed to be re-attached after hopper mounted and locked in position.
Read less
Was this instruction helpful to you?
Thank you for voting!