Models > KFP710WH0 > Instructions

KFP710WH0 Whirlpool Food Processor - Instructions

Jump to:

All Instructions for the KFP710WH0
1 - 15 of 28
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Paula from Sarasita, FL
Parts Used:
WP8211906
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Replacement bowl for Kitchenaid 7 cup food processor
Replaced broken bowl. The locking mechanism is not sturdy on the original and breaks in the bowl handle. If this replacement lasts, I will be happy because I really like the processor.
145 of 155 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sonia from Alamogordo, NM
Parts Used:
WP8211906
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
bowl of food processor needed replacing
replaced bowl of food processor :)
30 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tobin from ROBINS, IA
Parts Used:
WP8211906, WP8211900
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The handle on our bowl had broken at the latch
This bowl fit perfectly and was a much cheaper alternative to buying a new Kitchenaide food processor. No assembly simply switch the bowls out.
16 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Simone from ABERDEEN, ID
Parts Used:
WP8211906
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The plastic pin meant to insert into the processor when the bowl is snapped in place
(and thus enables the machine to process food), was not springing into its intended orifice. I tried to repair my original bowl but couldn't. For $18 I was able to save my favorite kitchen appliance. Thank you! Just had to swap the broken work bowl for the new one I ordered from your establishment. No disassembly required. Incredibly easy.
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donna from UNIVERSITY PL, WA
Parts Used:
WP8211906
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Work bowl lever broke.
Easy peasy. Just use the new bowl.
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from OCEAN SPRINGS, MS
Parts Used:
WP8211906
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
broken bowl
Replaced broken bowl with new bowl.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from BROADVIEW HTS, OH
Parts Used:
WP8211906
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
I broke the bowl of the food procressor and needed a new one
Just took the old one out and put this one in. It was perfect. Just like the one that the food processor came with.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from LIVERMORE, CA
Parts Used:
WP8211906
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
broken latch on old bowl
no brainer, just install bowl
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jordan from Peachtree City, GA
Parts Used:
WP8211906
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Original work bowl broke
Unwrapped new work bowl, set in place. Ta-da!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Betty from Golden Valley, AZ
Parts Used:
WP8211906
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Kitchen Aid Food Processor Work bowl broke.
No repair involved, just replacement. I am delighted to receive the bowl after a long wait. I tried several parts sales on line and they were all showing either back-order or out of stock. Getting more frustrated, I ended up purchasing a re-conditioned food processor, same make. Now with the new bowl received from PartSelect I have a backup if the work bowl becomes damaged again.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Qian from Oakland, CA
Parts Used:
WP8211906
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
original bowl broke to pieces at handle
replace entire bowl
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Rapid City, SD
Parts Used:
WP8211906
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Work bowel broke
Purchased a new bowel from Part Select
Was this instruction helpful to you?
Thank you for voting!
Customer:
Janice from Arlington, MA
Parts Used:
WP8211906
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The locking mechanism on the work bowl broke while shredding cheese. This is the second time in 3 years that this part had to be replaced.
Easy enough to order and quick delivery, even with holiday shipping. Possible design flaw?
Was this instruction helpful to you?
Thank you for voting!
Customer:
NANCY from LAKE IN THE HILLS, IL
Parts Used:
WP8211906
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Food processor didn't operate when food processor plugged in and on button pressed.
No repair needed, a part on original work bowl must have broken, so bowl wouldn't lock properly to base and processor wouldn't operate. Replacement bowl fixed the problem right away. Thank you!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from Orlando, FL
Parts Used:
WP8211906
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The handle of the original bowl was broken.
No repair....just a new bowl. Very pleased though with this company....fast delivery and half the price of going through Kitchen Aid.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KFP710WH0
1 - 15 of 28