4KFP720WH2 KitchenAid Food Processor - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Paula from Sarasita, FL
- Parts Used:
- WP8211906
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Replacement bowl for Kitchenaid 7 cup food processor
Replaced broken bowl. The locking mechanism is not sturdy on the original and breaks in the bowl handle. If this replacement lasts, I will be happy because I really like the processor.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sonia from Alamogordo, NM
- Parts Used:
- WP8211906
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
bowl of food processor needed replacing
replaced bowl of food processor :)
Was this instruction helpful to you?
Thank you for voting!
The handle on our bowl had broken at the latch
This bowl fit perfectly and was a much cheaper alternative to buying a new Kitchenaide food processor. No assembly simply switch the bowls out.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Simone from ABERDEEN, ID
- Parts Used:
- WP8211906
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The plastic pin meant to insert into the processor when the bowl is snapped in place
(and thus enables the machine to process food), was not springing into its intended orifice. I tried to repair my original bowl but couldn't. For $18 I was able to save my favorite kitchen appliance. Thank you! Just had to swap the broken work bowl for the new one I ordered from your establishment. No disassembly required. Incredibly easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donna from UNIVERSITY PL, WA
- Parts Used:
- WP8211906
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Work bowl lever broke.
Easy peasy. Just use the new bowl.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from LIVERMORE, CA
- Parts Used:
- WP8211906
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
broken latch on old bowl
no brainer, just install bowl
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from OCEAN SPRINGS, MS
- Parts Used:
- WP8211906
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
broken bowl
Replaced broken bowl with new bowl.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from BROADVIEW HTS, OH
- Parts Used:
- WP8211906
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
I broke the bowl of the food procressor and needed a new one
Just took the old one out and put this one in. It was perfect. Just like the one that the food processor came with.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Terry from Tucson, AZ
- Parts Used:
- 8211807
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
broken housing gears
This required a several unsuccessful phonecalls to small parts repair companies who didn't know how to remove the old plastic casing required to fix the electronics. An electronics friend assisted me and took all morning to help take it apart and repair it. Now, there is another problem: the safety switch spring is not engaging with the food container. Very frustrating that these devices cannot be repaired simply. It should not be necessary to purchase an entire new unit, but it appears they are so designed to do just that.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Heather from Tucker, GA
- Parts Used:
- WP8211906
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
handle broke
i hate the handle. it is evil. but i love the machine itself,so... major problem: I wanted red but the red was 47 and the white was 17...i went with white
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joan from Canton, NY
- Parts Used:
- WP8211906
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken handle switch
replaced bowl with new handle
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jane from Bloomsburg, PA
- Parts Used:
- WP8211906
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The work bowl of my food processor broke
I tried to purchase a new bowl at a store that sell KitchenAid with no luck. After a trip to our nearest outlet I went online and found PartSelect I ordered the new bowl on Saturday evening and it was delivered Tuesday morning. Thank you PartSelect you are listed in my favorites for my next mishap
Was this instruction helpful to you?
Thank you for voting!
The front part of the handle of the work bowl came off my old processor and you could not lock bowl in place. Thus, it required a new bowl or buy a new processor, which I did not want to do.
All I had to do was wash the bowl and lid and put in on the food processor.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carl from Vancouver, WA
- Parts Used:
- WP8211906
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
safety latch broke-machine would not start
Bought new work bowl, placed on drive section, everything worked fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Caroline from Ashville, NC
- Parts Used:
- WP8211906
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
a piece of the bowl handle broke off
I ordered a new work bowl, very easy!!
Was this instruction helpful to you?
Thank you for voting!