Models
>
KFPM770CR0
KFPM770CR0 KitchenAid Food Processor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for KFPM770CR0
Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
Used with Food Processors. Black handle is no longer available from the manufacturer.
No Longer Available
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for KFPM770CR0
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Roger from Ocate, NM
- Parts Used:
- 8211849
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Food Processor shaft sleeve crackeda
Removed the broken shaft by beaking it. Cleaned the metal shaft and coated it with light lubricant. Drove the new shaft on with a rubber mallet.
Would have been helpful to know if there is an easier way to remove the sleeve other than breaking it apart. In this case the sleeve was in bad shape and there was no problem with ... Read more the new one. However, had I been able to keep the damaged one as a back up it might prove helpful
Would have been helpful to know if there is an easier way to remove the sleeve other than breaking it apart. In this case the sleeve was in bad shape and there was no problem with ... Read more the new one. However, had I been able to keep the damaged one as a back up it might prove helpful
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- RONALD from ROSSVILLE, GA
- Parts Used:
- 8212408
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
bowl cover broken, safetey switch, would not allow power to unit
Customer service very helpful, part shipped that day. I recived part next day. I replaced bowl cover and we used the food procseor for Sunday Fund rasier meal for the youth
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Christine from Prescott Valley, AZ
- Parts Used:
- 8211849
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
the motor shaft sleeve cracked
First I chiseled the cracked and damaged sleeve with a flat head screwdriver until it was off of the steel shaft. Then I put some lubricant on the steel and hammered the new part on with the mallet. It was so easy! I had this broken Cuisinart food processor in my pantry for months, I thought I would have to get a new one. I stumbled upon
... Read more
this website looking for something else and found the replacement part, it saved me hundreds. Thanks PartSelect!
Read less
Was this instruction helpful to you?
Thank you for voting!