4KFP720WH0 KitchenAid Food Processor - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Paula from Sarasita, FL
- Parts Used:
- WP8211906
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Replacement bowl for Kitchenaid 7 cup food processor
Replaced broken bowl. The locking mechanism is not sturdy on the original and breaks in the bowl handle. If this replacement lasts, I will be happy because I really like the processor.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sonia from Alamogordo, NM
- Parts Used:
- WP8211906
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
bowl of food processor needed replacing
replaced bowl of food processor :)
Was this instruction helpful to you?
Thank you for voting!
The handle on our bowl had broken at the latch
This bowl fit perfectly and was a much cheaper alternative to buying a new Kitchenaide food processor. No assembly simply switch the bowls out.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Simone from ABERDEEN, ID
- Parts Used:
- WP8211906
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The plastic pin meant to insert into the processor when the bowl is snapped in place
(and thus enables the machine to process food), was not springing into its intended orifice. I tried to repair my original bowl but couldn't. For $18 I was able to save my favorite kitchen appliance. Thank you! Just had to swap the broken work bowl for the new one I ordered from your establishment. No disassembly required. Incredibly easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donna from UNIVERSITY PL, WA
- Parts Used:
- WP8211906
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Work bowl lever broke.
Easy peasy. Just use the new bowl.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from LIVERMORE, CA
- Parts Used:
- WP8211906
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
broken latch on old bowl
no brainer, just install bowl
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from BROADVIEW HTS, OH
- Parts Used:
- WP8211906
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
I broke the bowl of the food procressor and needed a new one
Just took the old one out and put this one in. It was perfect. Just like the one that the food processor came with.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from OCEAN SPRINGS, MS
- Parts Used:
- WP8211906
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
broken bowl
Replaced broken bowl with new bowl.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Betty from Golden Valley, AZ
- Parts Used:
- WP8211906
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Kitchen Aid Food Processor Work bowl broke.
No repair involved, just replacement. I am delighted to receive the bowl after a long wait. I tried several parts sales on line and they were all showing either back-order or out of stock. Getting more frustrated, I ended up purchasing a re-conditioned food processor, same make. Now with the new bowl received from PartSelect I have a backup if the work bowl becomes damaged again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pauletta from Gregory, MI
- Parts Used:
- WP8211906
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Locking mechanism on the handle of the work bowl broke
Opened the box, put in on the food processor, locked it into place and done!
Was this instruction helpful to you?
Thank you for voting!
No motor action due to bowl cover wear.
All I did was replace the bowl cover with the new one. The cover closing groove was worn/broken, not allowing the mechanical action needed to activate the interlock switch in the base.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marianne from Akron, OH
- Parts Used:
- WP8211906
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed a new work bowl
No repair required, just replacement of bowl.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joan from Canton, NY
- Parts Used:
- WP8211906
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken handle switch
replaced bowl with new handle
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jane from Bloomsburg, PA
- Parts Used:
- WP8211906
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The work bowl of my food processor broke
I tried to purchase a new bowl at a store that sell KitchenAid with no luck. After a trip to our nearest outlet I went online and found PartSelect I ordered the new bowl on Saturday evening and it was delivered Tuesday morning. Thank you PartSelect you are listed in my favorites for my next mishap
Was this instruction helpful to you?
Thank you for voting!