Models > 135202

135202 ((1344-99)) Briggs and Stratton Engine

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$21.54
In Stock
$4.42
This is a spark plug and it is found in various lawn equipment. If your engine is not starting or running poorly, you may need to replace the spark plug. This part is a RJ9LM. Meaning, it is a resisto...
In Stock
$5.14
In Stock
$5.14
Special Order
This is the replacement carburetor kit for your small engine, used for outdoor power equipment. The carburetor rebuild kit includes the float, needle, gaskets, and seals that you need to refurbish you...
Special Order
This part includes one manufacturer-sourced carburetor diaphragm. A working diaphragm is an essential component of the engine, as it creates an airtight seal, needed for optimal engine performance. Th...
In Stock
In Stock
In Stock
Special Order
In Stock
In Stock
Special Order
In Stock

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 135202

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Thomas from ALFRED, ME
  • Parts Used:
    397358
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Dennis from MUKWONAGO, WI
  • Parts Used:
    272538S
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
no gas to carb
pulled off fuel pump cover ,cleaned surfaces. Applied gasket sealer and replaced fuel pump diaphragm.
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Steven C from CENTREVILLE, MI
  • Parts Used:
    495606
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Old diaphragm dried up
Tore carburetor off leaf blower and replaced. To do that require taking off the air cleaner removing the gas tank and all the brackets holding the controls on it. And keeping track of all the screws and Wires that control choke and throttle. I took several photographs. I did not need all the gaskets and jet’s that were included in the kit but it had what I needed.
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!