Models > 405777-0124-E1

405777-0124-E1 Briggs and Stratton Engine

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 405777-0124-E1

Viewing 7 of 7
Air Cleaner Blower Housing Diagram and Parts List for Briggs and Stratton Engine
Air Cleaner Blower Housing
Alternator Fuel Supply Ignition Diagram and Parts List for Briggs and Stratton Engine
Alternator Fuel Supply Ignition
Camshaft Crankshaft Gasket Set - Engine Gasket Set - Valve Lubrication Piston Rings Connecting Rod Diagram and Parts List for Briggs and Stratton Engine
Camshaft Crankshaft Gasket Set - Engine Gasket Set - Valve Lubrication Piston Rings Connecting Rod
Carburetor Kit - Carburetor Overhaul Diagram and Parts List for Briggs and Stratton Engine
Carburetor Kit - Carburetor Overhaul
Controls Electric Starter Exhaust System Flywheel Governor Spring Diagram and Parts List for Briggs and Stratton Engine
Controls Electric Starter Exhaust System Flywheel Governor Spring
Cylinder Engine Sump Diagram and Parts List for Briggs and Stratton Engine
Cylinder Engine Sump
Cylinder Head Intake Manifold Valves Diagram and Parts List for Briggs and Stratton Engine
Cylinder Head Intake Manifold Valves
Keep searches simple, eg. "belt" or "pump".
Aluminum Push Rod – Part Number: 690982
This is a replacement push rod for your lawn tractor engine. It is made of aluminum and is the push rod used for the exhaust valve. Occasionally, the push rod in your engine can become damaged, and wi...
No Longer Available
Gasket-rocker Cover – Part Number: 690971
$9.20
This part includes one manufacturer-approved rocker cover gasket for a lawn tractor. This gasket is for the cylinder head where it creates a tight seal to protect the equipment from leaks. Over time t...
In Stock
Order now and your part arrives by Mar 19
Engine Oil Seal – Part Number: 795387
$9.47
In Stock
Order now and your part arrives by Mar 19
Engine Oil Seal – Part Number: 391086S
$7.90
This is a genuine OEM sourced replacement part designed for use with a variety of lawn and garden equipment. This item fits the cylinder and helps to provide an air tight seal to prevent any leaks. It...
In Stock
Order now and your part arrives by Mar 19
Engine Cylinder Head Gasket – Part Number: 693997
$29.39
This is a replacement cylinder head gasket for your small engine. The gasket is approximately 5 inches in length and 5 inches in width at its longest and widest points. The gasket creates a seal, and ...
In Stock
Order now and your part arrives by Mar 19
Crankcase Gasket With Bolts – Part Number: 594195
$51.95
This genuine crankcase gasket is used on small lawn and garden engines. Its purpose is to make an air tight seal so that no air/oil leakage occurs. Over time this gasket will deteriorate and will need...
In Stock
Order now and your part arrives by Mar 19
Key-flywheel – Part Number: 222698S
$6.25
This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Plier...
In Stock
Order now and your part arrives by Mar 19
Seal-o Ring – Part Number: 691917
$6.25
This item is an authentic OEM part. It is used in various models of Toro tractors and Briggs & Stratton engines. An o-ring is used to seal and protect in between rigid connected pieces. Proper seal is...
In Stock
Order now and your part arrives by Mar 19
Gear-governor – Part Number: 793338
$39.75
This gear-governor is a special component that helps to engage the drive shaft. It is a genuine Briggs and Stratton item that is supplied by the original manufacturer for use with small engines that a...
On Order
Filter-oil – Part Number: 492932S
$14.78
In Stock
Order now and your part arrives by Mar 19
Gasket-exhaust – Part Number: 690970
$6.25
This is a genuine OEM sourced replacement exhaust gasket. It is specially made for use with Briggs and Stratton engines commonly used on Toro lawn and garden equipment. Its purpose is to provide an ai...
In Stock
Order now and your part arrives by Mar 19
Gear-pinion – Part Number: 695708
$7.70
This is a manufacturer approved starter pinion gear designed for use with lawn and garden equipment engines. This Starter pinion gear is attach to the starter clutch drive and engages the flywheel to ...
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 405777-0124-E1

Viewing 1 of 1
Engine misfires
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Robert from WHITMAN, MA
Parts Used:
84001918, 84001919, 690982, 597785
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
the head blew a vaulve guide destoying push rods
about 6 hours to tear down and replace don't do it in the hot sun needed more breaks takes longer, but the new factory heads did it started up 185 lbs of compression almost back to new, so much more power than old one's. FYI take off the motor cover every year clean out the debris (grass-mouse nest- and oil) it blocks the air and COOKS THE HEAD it only takes short time and will make that motor last a little longer but it is a BRIGGS engine
Read less
30 of 41 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
D from HUNTSVILLE, AL
Parts Used:
84001919
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
Engine quit due to valve guide sliding out causing rocker arm to be immovable resulting in bent push rods.
Clean engine with a Gunk type product. Remove valve cover. Loosen bolts and remove old cylinder head. One bolt is located inside valve cover area. Remove old gasket and inspect and clean that surface. Attach new head with new gasket using existing bolts. Torque to 18'#s with a cross type pattern. Attach new rocker arms and push rods. Set valve clearance to .004 - .006. Attach valve cover with gasket. Check oil level. Start and let it warm up. Let cool remove cover then check valve clearance again. Replace cover.
Read less
15 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
rodney from MUSCATINE, IA
Parts Used:
594195, 795387, 793338
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set
governor not working
Had to pull the engine off the rider mower. Drained the oil took shield off the flywheel. Set it upside down on a 5 gal bucket. Took a 7/16 hand wrench to remove governor lever from bottom of engine. Left it in its location. Pulled 10 1/2 " bolts. Split engine case. Found the old governor had broke into pieces. Had to use a magnet t o remove all the pieces. Removed the small clip and removed gear. Lubed shaft slid new on put new clip on. Lined governor weights with center piece tapped it in place very lightly. Cleaned gasket flanges pulled the shaft seal. Used the old seal as a seal driver. When putting the cover back on make sure the seal dont roll out. Take a mini screwdriver and tuck it in around shaft. Put bolts back in and tighten like instructions
Read less
14 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More