286702-4515-A1 Briggs and Stratton Engine - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- William from SPRING GREEN, WI
- Parts Used:
- 796201
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench (Adjustable)
My Briggs & Strattan (Troy Bilt) riding mover had broken vanes(blades) on the engine.
I went to Troy-Bilt first first for the part-nothing, then B&S engine, still no help surfing their websites for this part. Again, no help. Before giving up completely I thought about all the parts I have bought from PartSelect for washers and such. Typed in "Fan-Flywheel" B&S. First thing that popped up was a picture of this part. All my searching on Troy-Bilt mower site and B&S site for over two hours with no results, and then I go to PartSelect and without my model number or anything else, they had it and even displayed my model number and sent it right away, popped it in and the mower is working fine as ever. No matter what you need, I say save yourself a lot of time and just go here first. I'm a loyal member of PartSelect for over six years!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bruce from CARNATION, WA
- Parts Used:
- 691656
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Wouldn’t start.
I installed a new solenoid starter. Took me a total of 20 minutes. Started right up.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carmen from APPLE VALLEY, MN
- Parts Used:
- 796201
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
Old fan broke from previous owner
Used this an old (maybe a 2007?) Briggs and Stratton 17.5 ho engine.This fan wasn’t an exact replica of the old one. But the bolt holes were in the right spot and it was the right size. Had to drill out the little dimples for the bolts and the fan guard that goes on top to stop debris didn’t screw directly into the fan like the old one. But I was able to attach the guard to the engine cover/piece that houses the air filter with a plastic bracket/retainer that was already on the engine. Overall, easy install and fit just fine once I determined how I wanted to attach the fan guard
Was this instruction helpful to you?
Thank you for voting!
engine with out oil connesting rod melted to crankshaft
took engine apart cleaned everything polished crank put rebuilt grease on metal parts changed connecting rod .assembled engine , lawnmower runs / very lucky
Was this instruction helpful to you?
Thank you for voting!