Models
>
130232-0780-XX
130232-0780-XX Briggs and Stratton Engine
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 130232-0780-XX
Viewing 7 of 7
Keep searches simple, eg. "belt" or "pump".
$6.25
This is an OEM replacement part, sold individually. This Grommet is an elbow for the crankcase breather tube. These rubber elbows were just a convenient way to make a 90 degree bend back when they us...
In Stock
Order now and your part arrives by Mar 21
$6.25
Genuine OEM replacement Grommet used on Lawn and Garden equipment Engines. This Rubber breather grommet is used as a seal between Breather Assembly and the Breather Tube. Over time rubber grommet may ...
In Stock
Order now and your part arrives by Mar 21
$3.99
This is a Genuine Briggs & Stratton part used on 3-5 HP horizontal Pulsa-Jet Carburetor engines (new style). This part is sold individually. Diaphragms are an essential part of an engine because they ...
In Stock
Order now and your part arrives by Mar 21
$6.25
This is a Genuine Manufacturer Sourced replacement part used on a variety of Engines. This part provides an air tight seal for mounting the Gas Tank. This part is made out of Composite Material and it...
In Stock
Order now and your part arrives by Mar 21
$18.97
This starter pulley, also known as a recoil starter pulley, is sourced from the original manufacturer for use in outdoor power equipment. It includes the starter rope and plastic spool to hold the rop...
In Stock
Order now and your part arrives by Mar 21
Genuine Manufacturer Approved replacement part used on a variety of Engines. This is a tube pick-up for 3-5HP horizontal and 5HP vertical engines with 2 and 3 quart tanks and a pulsa jet carburetor. T...
No Longer Available
$46.98
This starter clutch is an authentic OEM replacement part used in small outdoor power engines. Each package includes one clutch and one ball bearing. The starter clutch allows the engine to start by en...
In Stock
Order now and your part arrives by Mar 21
$8.30
This item is a genuine OEM sourced part that is intended to be used with small engines from Briggs & Stratton and Toro. The gasket is used to seal the connection between the cylinder and the head. A h...
On Order
$61.15
This magneto provides the spark your engine needs to start and run properly. It’s a durable replacement for a worn coil and installs easily—just set the correct gap and reconnect the wiring for smooth operation.
In Stock
Order now and your part arrives by Mar 21
$7.30
This item is an authentic part that is OEM sourced to ensure quality. The oil seal is intended to be used with small engines from Briggs & Stratton and Toro. This item is used to prevent leaks and to ...
In Stock
Order now and your part arrives by Mar 21
$6.25
This is an authentic manufacturer sourced replacement part designed for use with a variety of lawn and garden equipment. This carburetor intake gasket which provides an air tight seal for the carburet...
In Stock
Order now and your part arrives by Mar 21
$6.25
It is a genuine replacement item that is supplied by original equipment manufacturer for use with Briggs and Stratton engines. This gasket helps to provide an air tight seal between the crackcase and ...
In Stock
Order now and your part arrives by Mar 21
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 130232-0780-XX
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Thomas from ALFRED, ME
- Parts Used:
- 397358
- Difficulty Level:
- Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Was this instruction helpful to you?
Thank you for voting!
Replace fuel diaphragm, fuel pickup tube and air cleaner
This 5hp B&G was manufactured in 1985! Had been garage kept and always dependable. After 10 years of non use the carb wasn't getting gas. Removed air cleaner box, muffler and crankcase breather to easily remove carb, replace parts and reassemble.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alberto from PALMETTO BAY, FL
- Parts Used:
- 692237
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
Was this instruction helpful to you?
Thank you for voting!