Models > 15T202-0169-F8

15T202-0169-F8 Briggs and Stratton Engine

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Filter-a/c Foam – Part Number: 493537S
$8.62
This part includes one OEM certified foam pre-cleaner for a small engine. This filter is crucial for maintaining a smooth-running engine by adding an extra layer of protection from dirt and debris. Re...
In Stock
Order now and your part arrives by Jun 5
Seal-oil – Part Number: 299819S
$7.60
This item is an authentic part that is OEM sourced to ensure quality. The oil seal is intended to be used with small engines from Briggs & Stratton and Toro. This item is used to prevent leaks and to ...
In Stock
Order now and your part arrives by Jun 5
Fuel Tank – Part Number: 799863
$108.25
This genuine fuel tank assembly is sourced directly from the original equipment manufacturer and is specifically designed for use with Briggs & Stratton engines on lawn and garden equipment. It serves...
In Stock
Order now and your part arrives by Jun 5
Gasket-exhaust – Part Number: 692237
$7.16
The exhaust gasket attaches to the exhaust manifold and helps to form a seal. It is an authentic OEM sourced part which is specially designed for use with Briggs & Stratton generators and engines, plu...
In Stock
Order now and your part arrives by Jun 5
Clamp-hose – Part Number: 791850
$6.51
This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Kee...
In Stock
Order now and your part arrives by Jun 5
Starter-rewind – Part Number: 591301
$68.80
Used With 5MM Diameter Starter Rope
In Stock
Order now and your part arrives by Jun 5
Screw – Part Number: 690837
$6.51
This replacement screw is a genuine OEM sourced hardware designed for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It has multiple applications depending ...
In Stock
Order now and your part arrives by Jun 5
Engine Carburetor Overhaul Kit – Part Number: 792006
$35.35
This OEM approved overhaul kit is designed for rebuilding/fixing carburetor on a Briggs and Stratton engine. This kit contains all the necessary gaskets, diaphragms and other parts to rebuild your car...
In Stock
Order now and your part arrives by Jun 5
Lawn & Garden Equipment Engine – Part Number: 691251
No Longer Available
Key-flywheel – Part Number: 796335
$9.04
This item is a genuine Briggs & Stratton replacement part that has been sourced from the original manufacturer to be used with small engines. The metal key fits into the slot on the crankshaft and ali...
In Stock
Order now and your part arrives by Jun 5
Puller-flywheel – Part Number: 19203
$40.11
This flywheel puller is designed for servicing larger small engines by safely removing tightly seated flywheels without stressing the crankshaft or damaging ignition components. Constructed from heavy...
In Stock
Order now and your part arrives by Jun 5
Gasket-crankcase – Part Number: 699485
$11.83
The crankcase gasket fits between the crankcase cover and the crankcase. This item is available as an individual replacement part and is made out of a thin material. It is a genuine replacement part f...
Special Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Dana from HAMMOND, IN
Parts Used:
792006
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Mistreated Briggs & Stratton 206 CC Engine on MTD Chipper
Removed tank and drained old gas.
Removed and disassembled carb. Needed new gaskets and seals, and had to clean corn syrup glaze (separated ethanol) from bowl and everywhere else with carb cleaner.
Throttle linkage was de-plating/rusty. Steel wool and WD40 got it moving again.
Cleaned spark plug electrode.
Reassemble d, poured Sea Foam in the bottom of the tank and gave it a few pulls.
Let Sea Foam sit for a while, then filled the tank with Premium.
Blew white smoke for a minute then ran like new. Shredded for a while, then changed the oil.
Read less
8 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from N FRANKLIN, CT
Parts Used:
591301
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Starter Rewind broke internally-rope did not work
Removed old broken rewind starter (4 bolts); found the Model and Serial numbers; found Parts Direct and ordered new assembly; upon delivery, reinstalled with new Starter and hardware.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alberto from PALMETTO BAY, FL
Parts Used:
692237
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
11 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More