Models > 135202

135202 ((0142-01)) Briggs and Stratton Engine

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$22.41
In Stock
This is a spark plug and it is found in various lawn equipment. If your engine is not starting or running poorly, you may need to replace the spark plug. This part is a RJ9LM. Meaning, it is a resisto...
In Stock
$5.34
In Stock
$5.34
In Stock
This is the replacement carburetor kit for your small engine, used for outdoor power equipment. The carburetor rebuild kit includes the float, needle, gaskets, and seals that you need to refurbish you...
In Stock
This part includes one manufacturer-sourced carburetor diaphragm. A working diaphragm is an essential component of the engine, as it creates an airtight seal, needed for optimal engine performance. Th...
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
This is a filter cartridge for the air filter in various lawn equipment. The filter removes dirt, dust, and other debris from entering the carburetor, and contaminating the engine. If the engine in yo...
In Stock

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 135202

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Thomas from ALFRED, ME
Parts Used:
397358
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
11 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dennis from MUKWONAGO, WI
Parts Used:
272538S
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
no gas to carb
pulled off fuel pump cover ,cleaned surfaces. Applied gasket sealer and replaced fuel pump diaphragm.
10 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steven C from CENTREVILLE, MI
Parts Used:
495606
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Old diaphragm dried up
Tore carburetor off leaf blower and replaced. To do that require taking off the air cleaner removing the gas tank and all the brackets holding the controls on it. And keeping track of all the screws and Wires that control choke and throttle. I took several photographs. I did not need all the gaskets and jet’s that were included in the ki t but it had what I needed.
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!