Models > TPE-250PF

TPE-250PF Tanaka Edger

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for TPE-250PF

Viewing 12 of 12
Keep searches simple, eg. "belt" or "pump".
This is a return grommet for your lawn and garden equipment. This part creates an airtight seal to prevent fuel leaking from your machine. We recommend installing both the grommet and the return fuel ...
In Stock
This is a pipe fuel assembly for a variety of lawn and garden equipment. This pipe is also known as a fuel line, and it is 160mm long by 5mm wide. This part feeds the carburetor with fuel by connectin...
In Stock
This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation in...
In Stock
This primer bulb is used to draw extra fuel into the carburetor, allowing the engine to easily start. The primer bulb fits various power tools and is sold individually. When the purge bulb is pressed ...
No Longer Available
This is a clip, but you may also know it as a ring, and it is for your lawn and garden equipment. This part has a 6.3mm diameter and is made of metal. It is sold individually. The clip is most often u...
On Order
Special Order
In Stock
In Stock
On Order
In Stock
In Stock

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    David from SACRAMENTO, CA
  • Parts Used:
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Gas-powered scooter would not run
Replaced coil-ignition
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!