Models > 325

325 (E X-Series 2001-01) Husqvarna Edger

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 325

Viewing 14 of 14
Keep searches simple, eg. "belt" or "pump".
This is an air purge for various lawn and garden equipment. The air purge may also be known as the primer bulb, and it is made for small engines. This part circulates fuel into the carburetor of your ...
In Stock
In Stock
$5.29
This is a hose for your lawn and garden equipment. It is just over 4 inches long, and made of a strong, and durable plastic. The hose is connected to the air purge bulb and the carburetor, and may be ...
In Stock
This is a hex nut flange for your lawn and garden tools. It is size M8, meaning it has an 8mm inner diameter, and a 1.25 thread pitch. The hex nut has a washer like base to ensure the nut stays tight....
In Stock
In Stock
$38.60
In Stock
$6.21
In Stock
$5.29
In Stock
In Stock
$3.99
In Stock
$7.95
On Order
$8.71
In Stock

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jeremy from DILLSBURG, PA
Parts Used:
537034101
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Fixed up somebody's old trimmer they threw at the curb
This trimmer was in relatively good shape. Somebody had thrown it out! They thought they had broke the rewind, but when I ended up taking it off, it sucked right back in. They also must have broke the vibration plate on the bottom. With the screws and plate I bought from here, plus a new head and service kit I got elsewhere , this thing r an like a champion again.
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bruce from ALGOMA, WI
Parts Used:
503718201
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
part not same
Ordered on/off switch. My switch had only one wire terminal. Replacement had two. I ran a wire from one to a screw as a ground. Switch worked fine.
4 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!