Models
>
PAS-261
PAS-261 (06001001-06999999) Echo Edger
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$24.58
Routine maintenance does not need to be time-consuming, servicing your engine should not take more than 10 minutes with this kit. Inspecting and replacing these parts regularly ensures your engine wil...
In Stock
Order now and your part arrives by May 1
$6.51
Replacing the spark plug should be part of your regular maintenance. How often to replace it depends on your model but is generally changed at least once a year or more, depending on use. When a spark...
In Stock
Order now and your part arrives by May 1
$11.16
This check valve or the fuel tank vent is connected to the fuel tank in the following products: hedge trimmer, leaf blower/vacuum, chainsaw, edger, engine, tiler, auger, water pump, chipper shredder, ...
In Stock
Order now and your part arrives by May 1
$7.42
This is a primer pump or primer bulb, and it is used on various outdoor lawn equipment. This part has an outer diameter of 0.616 inches, it is dome shaped, and transparent. The primer pump gives the e...
In Stock
Order now and your part arrives by May 1
$11.90
This is an OEM fuel filter and is sold individually. This repair is very easy and will only take a few minutes. It is also a very important maintenance task that should be done regularly. This part is...
In Stock
Order now and your part arrives by May 1
$6.51
This is an orange throttle trigger, used on various model types with a small engine. This is an OEM replacement part, ensuring the perfect fit and function. The throttle cable is connected to the trig...
In Stock
Order now and your part arrives by May 1
$10.18
This is a single filter designed to be used in various model-types, ranging from trimmers, edgers, and blowers (to name a few). A well-maintained filter is an essential part to keeping your equipment ...
In Stock
Order now and your part arrives by May 1
$6.51
This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.
In Stock
Order now and your part arrives by May 1
$6.51
This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation in...
In Stock
Order now and your part arrives by May 1
$6.51
Genuine Echo replacement part, this item is sold individually. This is part of the safety start system on all of the trimmers listed below. This part is installed on the top handle and has to be press...
In Stock
Order now and your part arrives by May 1
$6.51
This is a genuine replacement part sourced from original manufacturer for use with handheld gas trimmers and blowers. Spark arrester fits inside of the muffler and it helps to prevent the emission of ...
In Stock
Order now and your part arrives by May 1
$6.51
Genuine OEM replacement part, this item is sold individually. This gasket acts as a seal to keep air and debris from entering the engine. Over time gaskets will compress and breakdown and then need replacement.
In Stock
Order now and your part arrives by May 1
$6.51
This genuine OEM sourced replacement part is designed for use with blowers/trimmers. This is the spring for the spark plug boot. This spring is made out of metal and it is sold individually.
In Stock
Order now and your part arrives by May 1
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Keith from NORWOOD, NJ
- Parts Used:
- A369000460
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from PUYALLUP, WA
- Parts Used:
- X502000330, X503000460, A350000660
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Fuel Tank leaking
Ordered an after market kit with gaskets and hoses. WRONG Ordered the right parts from Parts Select along with new tank. Original fuel hose had 2 loops in tank end and After market had a straight hose. Parts Select had the right hoses and solved the problem. EASY fix.
Removes the base with 4 screws. removed the 2 screws holding the ... Read more tank. Pulled off the 3 hoses, had already assembled the new tank with hoses and fittings. Reassembled and tested
Removes the base with 4 screws. removed the 2 screws holding the ... Read more tank. Pulled off the 3 hoses, had already assembled the new tank with hoses and fittings. Reassembled and tested
Read less
Was this instruction helpful to you?
Thank you for voting!