Models > PAS-261

PAS-261 (02001001-02999999) Echo Edger

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Tune-up Kit – Part Number: 90153Y
$23.60
Routine maintenance does not need to be time-consuming, servicing your engine should not take more than 10 minutes with this kit. Inspecting and replacing these parts regularly ensures your engine wil...
In Stock
Order now and your part arrives by Mar 19
Leaf Blower Fuel Tank Vent – Part Number: A356000031
$10.72
This check valve or the fuel tank vent is connected to the fuel tank in the following products: hedge trimmer, leaf blower/vacuum, chainsaw, edger, engine, tiler, auger, water pump, chipper shredder, ...
In Stock
Order now and your part arrives by Mar 19
Purge Bulb – Part Number: 12318140630
$7.13
This is a primer pump or primer bulb, and it is used on various outdoor lawn equipment. This part has an outer diameter of 0.616 inches, it is dome shaped, and transparent. The primer pump gives the e...
In Stock
Order now and your part arrives by Mar 19
Fuel Filter Assy. – Part Number: A369000460
$11.43
This is an OEM fuel filter and is sold individually. This repair is very easy and will only take a few minutes. It is also a very important maintenance task that should be done regularly. This part is...
In Stock
Order now and your part arrives by Mar 19
Throttle Trigger – Part Number: 17801052130
$6.25
This is an orange throttle trigger, used on various model types with a small engine. This is an OEM replacement part, ensuring the perfect fit and function. The throttle cable is connected to the trig...
In Stock
Order now and your part arrives by Mar 19
Air Filter – Part Number: 13031051830
$9.78
This is a single filter designed to be used in various model-types, ranging from trimmers, edgers, and blowers (to name a few). A well-maintained filter is an essential part to keeping your equipment ...
In Stock
Order now and your part arrives by Mar 19
Fuel Line Clip – Part Number: V490001230
$6.25
This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.
In Stock
Order now and your part arrives by Mar 19
Trimmer Nut – Part Number: 90050000005
$6.25
This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation in...
In Stock
Order now and your part arrives by Mar 19
Spark Arrester Screen – Part Number: 14586240630
$6.25
This is a genuine replacement part sourced from original manufacturer for use with handheld gas trimmers and blowers. Spark arrester fits inside of the muffler and it helps to prevent the emission of ...
In Stock
Order now and your part arrives by Mar 19
Intake Gasket – Part Number: 13001013410
$6.25
Genuine OEM replacement part, this item is sold individually. This gasket acts as a seal to keep air and debris from entering the engine. Over time gaskets will compress and breakdown and then need replacement.
In Stock
Order now and your part arrives by Mar 19
Trimmer Spark Plug Coil – Part Number: 15901103432
$6.25
This genuine OEM sourced replacement part is designed for use with blowers/trimmers. This is the spring for the spark plug boot. This spring is made out of metal and it is sold individually.
In Stock
Order now and your part arrives by Mar 19
Throttle Return Spring – Part Number: 17804342230
$6.25
This spring is sourced directly from the original equipment manufacturer for use with Echo handheld trimmers and edgers. It is an important component that applies tension on the trigger-throttle. Over...
In Stock
Order now and your part arrives by Mar 19
Chainsaw Screw – Part Number: 90025305020
$6.25
This screw is supplied directly from original equipment manufacturer for use with Shindaiwa and Echo power equipment/tools. This screw is a standard hardware that has multiple uses depending on your m...
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Replacing the Leaf Blower Fuel Tank Vent

Replacing the Leaf Blower Fuel Tank Vent

Replacing the Spark Arrester Screen

Replacing the Spark Arrester Screen

Replacing the Stopper

Replacing the Stopper

Replacing the Fuel Tank Cap Gasket

Replacing the Fuel Tank Cap Gasket

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Keith from NORWOOD, NJ
Parts Used:
A369000460
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
24 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from PUYALLUP, WA
Parts Used:
X502000330, X503000460, A350000660
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Fuel Tank leaking
Ordered an after market kit with gaskets and hoses. WRONG Ordered the right parts from Parts Select along with new tank. Original fuel hose had 2 loops in tank end and After market had a straight hose. Parts Select had the right hoses and solved the problem. EASY fix.
Removes the base with 4 screws. removed the 2 screws holding the tank. Pulled off the 3 hoses, had already assembled the new tank with hoses and fittings. Reassembled and tested
Read less
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More