Models > PE-260

PE-260 (06001001-06999999) Echo Edger

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for PE-260

Viewing 16 of 16
Keep searches simple, eg. "belt" or "pump".
Replacing the spark plug should be part of your regular maintenance. How often to replace it depends on your model but is generally changed at least once a year or more, depending on use. When a spark...
In Stock
This check valve or the fuel tank vent is connected to the fuel tank in the following products: hedge trimmer, leaf blower/vacuum, chainsaw, edger, engine, tiler, auger, water pump, chipper shredder, ...
In Stock
This is a fuel return tube, for various lawn equipment. This part is yellow and is 90mm long. The tube is used to return the extra fuel back into the fuel tank. This happens after the primer bulb has ...
In Stock
This is a primer pump or primer bulb, and it is used on various outdoor lawn equipment. This part has an outer diameter of 0.616 inches, it is dome shaped, and transparent. The primer pump gives the e...
In Stock
This is an OEM fuel filter and is sold individually. This repair is very easy and will only take a few minutes. It is also a very important maintenance task that should be done regularly. This part is...
In Stock
This is an orange throttle trigger, used on various model types with a small engine. This is an OEM replacement part, ensuring the perfect fit and function. The throttle cable is connected to the trig...
In Stock
This is a single filter designed to be used in various model-types, ranging from trimmers, edgers, and blowers (to name a few). A well-maintained filter is an essential part to keeping your equipment ...
In Stock
$4.99
This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.
In Stock
$4.99
This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation in...
In Stock
In Stock
In Stock
In Stock

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Keith from NORWOOD, NJ
Parts Used:
A369000460
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
20 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!