Models > PE-2400

PE-2400 (001001-008000) Echo Edger

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for PE-2400

Viewing 9 of 9
Keep searches simple, eg. "belt" or "pump".
This is a genuine Echo replacement part. It is sold individually. By pressing the bulb it will purge the air from the carburetor. Then fuel will come up from the fuel tank through the fuel line then ...
In Stock
Order now and your part arrives by May 1
This is a fuel line grommet, and it is used with various lawn and garden equipment. This part prevents leaking fuel and fumes. The grommet is placed in the fuel tank to seal the opening area where the...
In Stock
Order now and your part arrives by May 1
This is a single OEM fuel filter that has been approved by the manufacturer, ensuring the highest quality. It is compatible with numerous types of outdoor power equipment, such as blowers, trimmers, e...
In Stock
Order now and your part arrives by May 1
This check valve or the fuel tank vent is connected to the fuel tank in the following products: hedge trimmer, leaf blower/vacuum, chainsaw, edger, engine, tiler, auger, water pump, chipper shredder, ...
In Stock
Order now and your part arrives by May 1
This is a fuel return tube, for various lawn equipment. This part is yellow and is 90mm long. The tube is used to return the extra fuel back into the fuel tank. This happens after the primer bulb has ...
In Stock
Order now and your part arrives by May 1
The V471001190 Fuel Pipe is connected to the fuel filter inside the fuel tank. It is inserted through the fuel line grommet and then connected to the carburetor so that when the primmer is pushed, it ...
In Stock
Order now and your part arrives by May 1
This is a genuine OEM replacement part, it is sold individually. Made of metal. Its purpose is to secure the fuel line to the fuel filter. It is commonly used with outdoor lawn equipment, and is compa...
In Stock
Order now and your part arrives by May 1
This is a genuine manufacturer approved replacement part designed for use with edgers and trimmers. The purpose of this part is to act as a seal for the insulator. This item is made out of compound ma...
In Stock
Order now and your part arrives by May 1
This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation in...
In Stock
Order now and your part arrives by May 1
This is a genuine replacement part sourced from original manufacturer for use with handheld gas trimmers and blowers. Spark arrester fits inside of the muffler and it helps to prevent the emission of ...
In Stock
Order now and your part arrives by May 1
Genuine OEM replacement part, this part is sold individually. This filter is used on the outdoor power equipment shown below. The purpose of this filter is to keep dust, dirt and other debris from ent...
In Stock
Order now and your part arrives by May 1
This is a genuine manufacturer sourced replacement part. It is specially designed for use with Shindaiwa and Echo trimmers/edgers. These blades are perfect for edging level ground around sidewalks and...
In Stock
Order now and your part arrives by May 1

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Stephen from NAPERVILLE, IL
Parts Used:
A369000480, 99944500071, 13211546730
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Replacing grommet that holds the fuel tubes
Any DIYer can do this. Don’t hesitate.
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from COEUR D ALENE, ID
Parts Used:
69900440931
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Echo trimmer had narrow shield. Bought wider one which reduced rocks and debris
Easiest repair ever. Turn the trimmer upside down so you can access the string assembly. Find the small hole in the shaft beneath the string assembly and insert a heavy gauge nail into it to hold the shat in place. Turn the string assembly counterclockwise until it comes off. Lift off the round metal piece that was under the string assemb ly.Find the 3 screws holding the shield in place and unscrew them. Pull the shield off. Install the new one in reverse order. I used the original hex screws as the new ones were philips head. Hex worked perfectly. I was amazed how easy thus was to do.
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ty from SPLENDORA, TX
Parts Used:
V471001191, 13201056330, 13101640930, 13211546730
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Fuel leaks
First remove any remaining fuel in the tank then remove existing fuel lines and grommet then replace with new grommet and fuel lines
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!