536797580 Craftsman Edger - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Thomas from Northbrook, IL
- Parts Used:
- 32668MA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
The drive belt on a 20+ year old Murray lawn edger had broken from age.
I had to remove the pulley and the belt guard with tools that everyone has - nothing fancy. Once they were off, it was easy to slip on the new belt and reattach the metal guard and the pulley that held the belt.
Was this instruction helpful to you?
Thank you for voting!
Leaking gasoline from carburetor bowl. No air filter
First took photos of the current hookup for referencing. Cleaned the area. Removed the gas tank for easy access to the fasteners and hookups. Everything came undone fairly easy. Cleaned the area some more. Installed all new parts and the form and fit was perfect. Quite the upgrade. Put it all back together. Primed the carb. After about 10 pulls the edger started right up. No gasoline leaks to be found. Shut down. Started on the first pull. I’m good to go.
Was this instruction helpful to you?
Thank you for voting!