Models > MGD8100DW1

MGD8100DW1 Whirlpool Dryer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Igniter Kit – Part Number: 279311
$33.20
This is a genuine OEM replacement igniter kit for your gas-heated clothes dryer. The silicon carbide igniter is used to light the gas that creates the heat in order to dry your clothes. If your dryer ...
In Stock
Order now and your part arrives by May 15
Leveling Foot – Part Number: 49621
$6.51
It is important for your dryer to be properly leveled, as an unleveled one can cause excessive vibration and noise when operating, may not drain properly, and can cause excessive wear on various parts...
In Stock
Order now and your part arrives by May 15
Dryer Radiant Flame Sensor – Part Number: WP338906
$36.42
This genuine OEM part is a radiant flame sensor for your gas dryer. It is used to determine when the temperature of the igniter is hot enough to ignite the gas. Once the igniter is hot enough, it allo...
In Stock
Order now and your part arrives by May 15
Moisture Sensor – Part Number: WP3387223
$9.79
This is an authentic OEM replacement moisture sensor for your dryer. The sensor detects the moisture levels in your clothing while the appliance is operating, and once the appropriate level has been r...
In Stock
Order now and your part arrives by May 15
Dryer Drum Seal with Adhesive – Part Number: 280114
$46.07
This part seals the drum to prevents air from escaping. This includes silicone rubber adhesive.
In Stock
Order now and your part arrives by May 15
Touch-Up Paint - White – Part Number: 72017
$11.98
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
In Stock
Order now and your part arrives by May 15
Motor Pulley - 60 Hz. – Part Number: WP8066184
$41.78
Hearing squealing or grinding from your dryer? The motor pulley might be the culprit. This part helps the drum spin by supporting the belt where it connects to the motor. It’s a genuine replacement an...
In Stock
Order now and your part arrives by May 15
Air Conditioner Cover Screw – Part Number: WP308685
$7.60
This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers,...
In Stock
Order now and your part arrives by May 15
Blower Wheel – Part Number: WP697772
$50.36
The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over ...
In Stock
Order now and your part arrives by May 15
Liquid Propane Gas Converter – Part Number: W11581317
$59.43
Converts natural gas burners to liquid propane.
In Stock
Order now and your part arrives by May 15
Dryer Drum Belt – Part Number: WPW10112954
$79.61
This OEM dryer drum belt measures approximately 92-1/2" and features 5 ribs and 4 grooves. It connects the drum to the motor pulley, allowing the drum to spin. Replace if the dryer isn’t tumbling, mak...
In Stock
Order now and your part arrives by May 15
Stacking Kit – Part Number: 8541503
$47.14
This kit comes with 2 adhesive pads, 2 brackets and 4 screws. This is for stacking the appliances vertically - dryer over washer.
In Stock
Order now and your part arrives by May 15
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for MGD8100DW1

Viewing 7 of 7
Noisy
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Not Heating
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Drum Not Spinning
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Marks left on clothes
Fixed by these parts
Fixing
How to fix it
Too hot
Fixed by these parts
Fixing
How to fix it
Won’t Start
Fixed by these parts
Fixing
How to fix it
Door won’t close
Fixed by these parts
Fixing
How to fix it
Replacing the Igniter Kit

Replacing the Igniter Kit

Replacing the Moisture Sensor

Replacing the Moisture Sensor

Replacing the Dryer Drum Seal with Adhesive

Replacing the Dryer Drum Seal with Adhesive

Replacing the Dryer Radiant Flame Sensor

Replacing the Dryer Radiant Flame Sensor

Replacing the Motor Pulley - 60 Hz.

Replacing the Motor Pulley - 60 Hz.

Replacing the Leveling Foot

Replacing the Leveling Foot

Replacing the Blower Wheel

Replacing the Blower Wheel

Replacing the Dryer Blower Housing Seal

Replacing the Dryer Blower Housing Seal

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Karen from Pine Mtn. Club,, CA
Parts Used:
279311
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
No heat to dry clothes
First I took the front of the dryer off then located the igniter. It only required removing two screws, removing old igniter, replacing with new igniter, and replacing the two screws.. While I was replacing the igniter I took the drum out and throughly cleaned the inside. Lucky me, I found 85 cents on the floor of the dryer. I am 65yr s old, married and mother of two.
This was easy to do and sure saved money. I reccommend others try to do repairs for themselves and using PartSelect was less expensive too.
Read less
66 of 77 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jerry from Everett, WA
Parts Used:
280114
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Rear tub seal failure
I removed the top cover and then the back cover, released the belt tensioner and removed the drive belt. Then slid the tub out of the unit and onto the back dack. Sanded the remnents of the old seal off. Wiped the tub lip with laquer thinner and applied the "fast" drying glue supplied with the kit. Installed the seal and re-assembled the unit...works fine
Read less
67 of 90 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
FRED from BRIELLE, NJ
Parts Used:
WP338906
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Gas Flame Would Drop Out
First it was a process of alimination to find out why it was dropping out. After the problem was found it was just a matter of replacing the holding coil on the gas valve. Thank you fred kenney sr
49 of 66 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More