Models
>
DV45DG6000HWAC
DV45DG6000HWAC Samsung Dryer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for DV45DG6000HWAC
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$46.07
This thermal cut-off fuse (part number DC47-00015A) is for dryers. Thermal cut-off fuse DC47-00015A shuts off the heat if the dryer overheats. Unplug the dryer before installing this part. Wear work g...
In Stock
Order now and your part arrives by May 3
In Stock
Order now and your part arrives by May 3
In Stock
Order now and your part arrives by May 3
$6.51
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
In Stock
Order now and your part arrives by May 3
In Stock
Order now and your part arrives by May 3
On Order
In Stock
Order now and your part arrives by May 3
In Stock
Order now and your part arrives by May 3
In Stock
Order now and your part arrives by May 3
$56.24
This door hinge guide (part number DC61-00891A) is for dryers. Door hinge guide DC61-00891A holds and supports the door hinge on the front panel. Unplug the dryer before installing this part. Wear wor...
On Order
In Stock
Order now and your part arrives by May 3
Common Problems and Symptoms for DV45DG6000HWAC
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Calvin from LEXINGTON PK, MD
- Parts Used:
- DC47-00015A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
DRYER HAD NO POWER AND WOULD NOT POWER ON.
NECESSARY REQUIREMENTS TO DISMANTLE AND TAKE OFF DRYER CASING USING SCREWDRIVER AND NEEDLE NOSE PLIERS TO REPLACE THERMAL FUSE LOCATED ON THEHEATING ELEMENT CASING.TOOK ME HALF HOUR REPLACED PART AND PROCEDED TO PUT EVERYTHING BCK IN PLACE.PLUGGED BACK INTO SOCKET .whalla IM UP AND RUNNING AGAIN.DIFFICULTY RATING 1 TO 10-3.thanks 4 your s
... Read more
upport this was not difficult or hard just required TIME & PATIENCE. Thank u once again.THIS SITE IS THE GREATEST.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dawn from CAMBY, IN
- Parts Used:
- DC47-00015A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Dryer not drying
Unplugged the dryer for safety. Unattached top of dryer from door with putty tool. Took front of dryer off. Unplugged door. Took off bracket to heating element case. Pulled out case. Replaced the thermostat. Then put all back together and tested the dryer. Works like a charm.
Was this instruction helpful to you?
Thank you for voting!