Models > DVE41A3000W

DVE41A3000W ((A3-00)) Samsung Dryer

Jump to:

Find Part by Name

Diagrams for DVE41A3000W

Viewing 7 of 7

Control Panel Assembly

Most Popular Parts for DVE41A3000W

Viewing 12 of 99

Timing Gear Belt

$44.96

Idler Pulley Bracket Motor

$62.79

Thermistor Sensor

$35.60

Heating Element

$153.40

Includes the insulators and restring already attached. This dryer heating element produces heat to dry clothes in a dryer and is located in the rear end. If the heater element is burned, dryer does no...

Safety Thermostat

$25.33

Dryer Thermostat Assembly

$51.02

Heater Duct Assembly w/ Thermostats

★★★★★

(1)

$288.97

High Limit Thermostat

$37.11

Filter Case

$45.78

Thermal Fuse

$50.85

Leg

$21.20

Leveling leg supports the dryer. Adjust the height of the leveling leg to make the dryer level.

Lint Filter Screen

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for DVE41A3000W

Viewing 3 of 3

Videos for DVE41A3000W

Viewing 8 of 8

Replacing the Timing Gear Belt

Replacing the Idler Pulley Bracket Motor

Replacing the Thermistor Sensor

Replacing the Safety Thermostat

Replacing the Heater Duct Assembly w/ Thermostats

Replacing the Dryer Thermostat Assembly

Replacing the Idler Tension Spring

Replacing the Leg

Installation Instructions for DVE41A3000W Provided by Fix customers like you

Viewing 3 of 27

Customer:: Christopher from SUGARLOAF, CA
Parts Used:: 6602-001655
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

The dryer turned on but the drum did not move when you pressed start even though It started it cycles.

I YouTube it and there’s a step by step process on how to do it, took maybe 30 mins. If I can so can you

23 of 40 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Cynthia from JOHNSTOWN, NY
Parts Used:: DC47-00019A, DC47-00016A, DC32-00007A
Difficulty Level:: Difficult
Total Repair Time:: More than 2 hours
Tools:: Screw drivers

Dryer wasn’t heating

Well it went really well until the dryer was put back together as it still didn’t heat. The dryer was taken apart again. This time the thermistors &fuse was tested. Alas, the new fuse was faulty. After putting the car lid fuse back on n, the dryer worked again

15 of 19 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Noah from OXFORD, KS
Parts Used:: DC93-00634A
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Tension/Dead Man Wheel Broke/Shattered

Dryer would not start but electronics were working.

Pulled top of dryer off; noticed the belt was loose but not broken.
Went in through the back (1 screw and removed the exhaust pipe/plate); noticed the wheel was broken and thus the belt had fallen off.

Ordered replacement wheel/arm.
One screw to remove ol ... Read more

Read less

11 of 20 people found this instruction helpful.

Was this instruction helpful to you?