Models > MDG6700AWW

MDG6700AWW Maytag Dryer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for MDG6700AWW

Viewing 5 of 5
CABINET - CONTROL PANEL Diagram and Parts List for Maytag Dryer
CABINET - CONTROL PANEL
DOOR - FRONT PANEL Diagram and Parts List for Maytag Dryer
DOOR - FRONT PANEL
DRUM Diagram and Parts List for Maytag Dryer
DRUM
DUCT, HEATER, MOTOR Diagram and Parts List for Maytag Dryer
DUCT, HEATER, MOTOR
SUPPLEMENTAL INFORMATION Diagram and Parts List for Maytag Dryer
SUPPLEMENTAL INFORMATION

Manuals & Guides for MDG6700AWW

Click to download
Install
Installation Instructions
(7.05MB)
Manual
Owner's Manuals
(13.47MB)
Keep searches simple, eg. "belt" or "pump".
Dryer Radiant Flame Sensor – Part Number: WP338906
$34.97
This genuine OEM part is a radiant flame sensor for your gas dryer. It is used to determine when the temperature of the igniter is hot enough to ignite the gas. Once the igniter is hot enough, it allo...
In Stock
Order now and your part arrives by Mar 19
Screw – Part Number: W11233072
$20.95
This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...
In Stock
Order now and your part arrives by Mar 19
Idler Pulley Assembly – Part Number: DC93-00634A
$58.09
This idler pulley assembly includes the pulley wheel and bracket, and is located near the motor in compatible dryer models. It maintains tension on the dryer belt, allowing the drum to rotate smoothly...
In Stock
Order now and your part arrives by Mar 19
Heating Element - 5300W – Part Number: DC47-00019A
$77.95
Includes the insulators and restring already attached. This dryer heating element produces heat to dry clothes in a dryer and is located in the rear end. If the heater element is burned, dryer does no...
In Stock
Order now and your part arrives by Mar 19
Dryer Heating Element – Part Number: WP35001247
$78.27
This element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is u...
In Stock
Order now and your part arrives by Mar 19
Gas Dryer Conversion Kit - NG to LP – Part Number: MAL9000AXX
$48.36
This conversion kit contains all parts needed to convert your gas dryer from natural gas (NG) to liquid propane (LP). This kit will work with some Samsung dryers as well. Use model # to ensure you are...
In Stock
Order now and your part arrives by Mar 19
Dryer Thermistor – Part Number: WP35001191
$58.09
This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
In Stock
Order now and your part arrives by Mar 19
Dryer Drum Support Roller w/Axle – Part Number: WPW10177428
$60.13
Sold individually.
In Stock
Order now and your part arrives by Mar 19
Thermal Fuse w/Bracket – Part Number: WP35001193
$42.18
This part is the replacement thermal fuse for your dryer. When you order this part, you will receive the fuse itself, as well as the bracket that mounts it to the dryer. The thermal fuse is approximat...
In Stock
Order now and your part arrives by Mar 19
Dryer Thermostat – Part Number: WP35001087
$49.39
This thermostat helps to regulate the dryer's internal temperature.
In Stock
Order now and your part arrives by Mar 19
Dryer Lint Filter – Part Number: WP35001141
This filter collects lint as it passes through the dryer vent.
No Longer Available
IGNITER ASSEMBLY – Part Number: WP33002789
$65.23
This part ignites the gas within the dryer.
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for MDG6700AWW

Viewing 4 of 4
Not Heating
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Noisy
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Drum Not Spinning
Fixed by these parts
Fixing
How to fix it
Won’t Start
Fixed by these parts
Fixing
How to fix it
Replacing the Heating Element - 5300W

Replacing the Heating Element - 5300W

Replacing the Dryer Radiant Flame Sensor

Replacing the Dryer Radiant Flame Sensor

Replacing the Idler Pulley Assembly

Replacing the Idler Pulley Assembly

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
JAMIE from VALLEY STREAM, NY
Parts Used:
WP35001191, WP35001087
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Dryer did not turn when power was on.
Callled the service company to diagnose the problem. Watched him take machine apart. He found the problem. Told me the parts that I needed. Didnt know what they were. Went to partselect.com looked my model up and found parts and ordered. Followed same steps as repair guy: Two screws in back of machine then slide top off. Six screws in front to remove front door ( 4 screws on top 2 on bottom) Changed the thermostat and thermistor. Saved 320 dollars :)
Read less
55 of 67 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Walter from Lynden, WA
Parts Used:
WP35001193
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
no heat in the dryer
Remove dryer covers and locate heater assembly. Removed heater assembly and checked visually if the heater coil is opened, I verified this with an ohm meter. Heater Continuity was OK. Next step I checked the heater sensors. Thermal fuse with bracket had no ohm meter reading between two terminals[open circuit]. Order part#35001193 "thermal fuse" with bracket from "partsSelect.com." Assemble back in reverse order. Please note that the dryer heater was filled with lint and needed a good cleaning.
Read less
56 of 84 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
FRED from BRIELLE, NJ
Parts Used:
WP338906
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Gas Flame Would Drop Out
First it was a process of alimination to find out why it was dropping out. After the problem was found it was just a matter of replacing the holding coil on the gas valve. Thank you fred kenney sr
49 of 66 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More