Models > 11068133410

11068133410 Kenmore Dryer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 11068133410

Viewing 6 of 6
Bulkhead Parts Diagram and Parts List for Kenmore Dryer
Bulkhead Parts
Cabinet Parts Diagram and Parts List for Kenmore Dryer
Cabinet Parts
Cover Sheet Diagram and Parts List for Kenmore Dryer
Cover Sheet
Door Parts Diagram and Parts List for Kenmore Dryer
Door Parts
Optional Parts (not Included) Diagram and Parts List for Kenmore Dryer
Optional Parts (not Included)
Top And Console Parts Diagram and Parts List for Kenmore Dryer
Top And Console Parts
Keep searches simple, eg. "belt" or "pump".
Idler Pulley – Part Number: 279640
$26.20
Often referred to as a dryer belt tension pulley wheel, this idler pulley is an OEM approved replacement part for a variety of dryer models. The idler pulley puts tension on the drive belt, and if the...
In Stock
Order now and your part arrives by Mar 19
Roller Support Tri-Ring – Part Number: WPW10512946
$11.50
This small but mighty OEM piece is called a tri-ring and is used to support the drum roller shaft and the idler pulley shaft in your dryer. It helps to provide a tight seal between components by evenl...
In Stock
Order now and your part arrives by Mar 19
Leveling Foot – Part Number: 49621
$6.25
It is important for your dryer to be properly leveled, as an unleveled one can cause excessive vibration and noise when operating, may not drain properly, and can cause excessive wear on various parts...
In Stock
Order now and your part arrives by Mar 19
Idler Pulley with Bracket – Part Number: W10837240
$26.73
If your dryer is not tumbling, will not start, or is excessively noisy while operating, there may be an issue with your idler pulley. The idler pulley works by maintaining a constant tension on the dr...
In Stock
Order now and your part arrives by Mar 19
CATCH – Part Number: W11429587
$22.00
If your dryer door keeps popping open or won’t latch, this door catch might be the fix you need. It’s a small part, but it plays a big role in keeping your dryer running smoothly. Just swap out the ol...
In Stock
Order now and your part arrives by Mar 19
Air Conditioner Cover Screw – Part Number: WP308685
$7.30
This is a multi-use cover screw. It fits appliances such as dryers, ranges, washers, dishwashers, refrigerators, air conditioners, washer dryer combos, freezers, wall ovens, microwaves, dehumidifiers,...
In Stock
Order now and your part arrives by Mar 19
Dishwasher Screw – Part Number: WPW10348409
$7.30
Sold individually.
In Stock
Order now and your part arrives by Mar 19
Dryer Terminal Block – Part Number: WP3397659
$18.85
This part is an electrical connector where you can attach wires. This part does NOT included the wires, screws, and nuts. Must be order separately
In Stock
Order now and your part arrives by Mar 19
Dryer Spring – Part Number: WPW10446781
$22.00
In Stock
Order now and your part arrives by Mar 19
Terminal Block Screw Kit – Part Number: 279393
$29.82
This kit includes 3 screws and 3 nuts.
In Stock
Order now and your part arrives by Mar 19
Range Screw – Part Number: WP3400805
$7.30
Sold individually.
In Stock
Order now and your part arrives by Mar 19
Dryer Screw – Part Number: WP681414
$7.30
This screw is sold individually.
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 11068133410

Viewing 6 of 6
Noisy
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door won’t close
Fixed by these parts
Fixing Fixing
How to fix it
Door Pops Open
Fixed by these parts
Fixing
How to fix it
Drum Not Spinning
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Won’t Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door latch failure
Fixed by these parts
Fixing
How to fix it
Replacing the Idler Pulley with Bracket

Replacing the Idler Pulley with Bracket

Replacing the CATCH

Replacing the CATCH

Replacing the Idler Pulley

Replacing the Idler Pulley

Replacing the Roller Support Tri-Ring

Replacing the Roller Support Tri-Ring

Replacing the Leveling Foot

Replacing the Leveling Foot

Replacing the Dryer Spring

Replacing the Dryer Spring

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
GREGORY from Wilsonville, OR
Parts Used:
279640
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Very Loud Squeaking Noise
1) Disconnected power cord from wall. 2) Disconnected vent hose from back of dryer. 3)Removed dryer rear panel. 4)Disengaged tension spring on idle wheel arm. 5) Removed worn idle wheel. 6)Installed new Idler wheel assembly. 7) Vacuumed dust from rear of dryer (optional, recommended). 8) Reinstalled rear cover, vent hose and power cord. E asy repair 15-30
Read less
77 of 98 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Princeton, WV
Parts Used:
279640
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
TOb stopped turning after a week or so of high pitched "squeals" coming from inside the dryer.
I recommend you order the idler pulley as soon as you start to hear the unusual noise indicating metal against metal. Replace the idler pulley before it fails and possibly causes more damage to the drive system. Simply removed the power cord at the back of the dryer and then the multiple screws holding the back panel in place as well as the clip holding the exhaust vent in place. You may need to remove the top panel to access a few of these screws. A diagram of the belt routing is in the paperwork I found behind the front lower panel of the dryer. This too is easily removed with just a few screws.
Read less
43 of 48 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Keith from Richmond, VA
Parts Used:
279640
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Idler Pulley broke
I disconnect the power, then the vent pipe. I removed the back panel of the dryer to access the pulley and removed the belt. Replaced the back and put everything back together.
21 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More