Models > GTD75ECSL0WS > Instructions

GTD75ECSL0WS General Electric Dryer - Instructions

Jump to:

All Instructions for the GTD75ECSL0WS
1 - 13 of 13
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Lisha|Lamb from SHELDON, MO
Parts Used:
WE03X23881
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Lint filter tore
Replaced riped filter with new mesh filter screen.
36 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cristina from WHITTIER, CA
Parts Used:
WE03X23881
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Broken/ Tore Lint Filter
Opened dryer door and pulled out and Removed Broken old Lint Filter, inserted New Lint Filter into Lint Filter slot, then closed Dryer door.
18 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Aaron from MERIDIAN, ID
Parts Used:
WE03X23881
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
needed new lint filter
pulled out old one put in new one
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Margarita from AUSTIN, TX
Parts Used:
WE03X23881
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Lint Filter Frayed
Took out frayed lint filter and put in new lint filter
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robin from CANTON, OH
Parts Used:
WE03X23881
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The old filter had holes in it
No repair, just replace the old with the new. Fast delivery.
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bruce from OKLAHOMA CITY, OK
Parts Used:
WE03X23881
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The lent filter was worn out, the screen was ripped and torn from west.
Very simple and easy it took no more than 10 seconds if that long. Remove the worn out screen (pull up and out), replace it with the new screen( slide it into the area where the old screen was removed. (No tools needed)
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Elizabeth A from STEVENS POINT, WI
Parts Used:
WE03X23881
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Torn screen on lint filter
Just put new lint filter in slot
I had torn the screen on the original one
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mary Ann from SUN CITY WEST, AZ
Parts Used:
WE03X23881
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The Lint filter in the dryer was damaged from continuous use.
I just popped in the new Filter and it fit perfectly. This will prolong the dryer use, looks like new.

Thank you Part Select.

One Happy customer
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sydrell from CHICAGO, IL
Parts Used:
WE03X23881
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
the bracket around the net was cracked
removed old lint trap cleaned excess lint that fell inside from the broken lint trap made it easier for new lint trap to slide in.
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Susan from LEVITTOWN, PA
Parts Used:
WE11X21156
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
no heat from dryer
used you tube and with your info. actually took apart dryer replaced part & reassemble
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from HILLIARD, OH
Parts Used:
WE10X23891
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Original door was broken. It had to be replaced.
Replacement door came with hinges. Removed four Phillips head screws, removed original door, and replaced it with the new door. Because I needed to move the dryer to allow room to get to the screws, I needed about 15 minutes to complete the project.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GTD75ECSL0WS
1 - 13 of 13