GFD49GRSK0WW General Electric Dryer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Pearl from PORT GIBSON, MS
- Parts Used:
- WE18X20428
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The edge of the original lint filter had separated causing lint to fall inside.
There was no repair. I simply replaced the old filter with a new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from DARTMOUTH, MA
- Parts Used:
- WE18X20428
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
After much use the screen eventually wears out from the heat and it tears
Just have to pull out the old screen assembly from the dryer slot and install the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maria from DANBURY, CT
- Parts Used:
- WE18X20428
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I just took the broke one out and got the new one in
Just w/ my hands
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shirley from Hubbard, IA
- Parts Used:
- WE25X10032
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
new install of gas dryer
Removed control panel, top and front panel to access the burner, then installed the natural to LP gas conversion kit, installed steam hose, plugged the unit in and it was ready to dry clothes. We had to call GE to learn how to access the burner...there was no information in their owner's manual or online on how to do that. But GE was great...they answered phone instantly and had a service tech return our phone call within minutes. The tech easily explained how to get to where we needed to be. The rest was easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marsha from BRAZIL, IN
- Parts Used:
- WE03X10016
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers
Loud banging/thumping noise when dryer was running. Bearings on tub rollers worn out. Poor design.
Could tell from the sound it was making that it was related to drum rotation. Searched online videos on how to disassemble this model GE Dryer. The Dryer drum rides on 4 rollers. 2 of the 4 of mine were very noticeably loose and made a similar noise when I spun them by hand. Simply replace the rollers and re-assembled.
I could type out instructions, but it's much simpler to just search for the right video online.
I could type out instructions, but it's much simpler to just search for the right video online.
Was this instruction helpful to you?
Thank you for voting!