Models > GTDP490GD1WS

GTDP490GD1WS General Electric Dryer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GTDP490GD1WS

Viewing 5 of 5
BACKSPLASH, BLOWER & MOTOR ASSEMBLY Diagram and Parts List for General Electric Dryer
BACKSPLASH, BLOWER & MOTOR ASSEMBLY
CABINET Diagram and Parts List for General Electric Dryer
CABINET
DRUM Diagram and Parts List for General Electric Dryer
DRUM
FRONT PANEL & DOOR Diagram and Parts List for General Electric Dryer
FRONT PANEL & DOOR
GAS VALVE & BURNER ASSEMBLY Diagram and Parts List for General Electric Dryer
GAS VALVE & BURNER ASSEMBLY

Manuals & Guides for GTDP490GD1WS

Click to download
Install
Installation Instructions
(0.94MB)
Manual
Owner's Manuals
(2.01MB)
Keep searches simple, eg. "belt" or "pump".
Drum Bearing Slide - White (Sold individually) – Part Number: WE1M504
$18.58
This single drum bearing slide attaches to the outer-most side of the bearing. This part is also sometimes referred to as a drum slide, drum glide, or drum pad. It provides support to the front of the...
In Stock
Duct Felt Seal – Part Number: WE09X27634
$11.56
This is a duct felt seal for a dryer. The duct felt seal allows the front-load dryer drum to glide smoothly on the front panel. Your dryer will not function properly if the drum felt seal is compromis...
In Stock
Drive Belt – Part Number: WE03X29897
$36.13
This 89.5-inch drive belt is for dryers. It has a 4-rib design on the inside for a better grip. If comparing the size of your current belt to the new one, keep in mind that a small amount of stretchin...
In Stock
D-Shaped Knob Clip – Part Number: WH01X10106
This clip fits inside the control knobs for your laundry machines, and helps to securely fasten the knob to the shaft, which allows you to easily turn the knob to select the correct settings. This is ...
No Longer Available
Light Bulb – Part Number: WE05X20431
$9.25
If the lightbulb inside your dryer drum has burned out, this is an authentic OEM replacement. It is a 10W, 120V bulb that is sold individually. The bulb turns on when the dryer door is open and should...
In Stock
Lint Filter - White Frame – Part Number: WE18X25100
$70.13
The lint filter is an important component of your dryer, as it traps lint and other debris from entering the dryer vents, where they can become a fire hazard. If your lint filter has become damaged or...
In Stock
Rear Drum Bearing Kit – Part Number: WE25M40
$88.17
This rear drum bearing kit is a genuine OEM replacement for your dryer. The kit includes a shaft, ground strap, bracket, bearing and seven screws for installation. The bearing supports that back of th...
In Stock
Door Handle - White – Part Number: WE01X20419
$25.14
This part is on the outer door of the dryer.
In Stock
Control Knob - Grey – Part Number: WE01X20380
$29.09
If the control knob on your dryer has become damaged, it can make it difficult to advance through the different settings. If you need a replacement, this is a genuine OEM control knob, which is gray i...
In Stock
Idler Pulley Wheel – Part Number: WE12X83
$34.79
A dryer's idler pulley wheel serves to help the belt to rotate the drum.
In Stock
Push-to-Start Switch – Part Number: WE4M416
$18.20
This push-to-start switch is a genuine OEM part and is used to activate your dryer. If your dryer will not start, or will only start if the switch is pushed down, or the timer knob is not engaging wit...
In Stock
Dryer Timer – Part Number: WE4M527
$148.32
This is a genuinely sourced dryer timer, sold individually. It keeps track of the desired time, making sure the dryer turns on and off at the proper time in that cycle. Some indications that it is tim...
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for GTDP490GD1WS

Viewing 9 of 9
Noisy
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door won’t close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Marks left on clothes
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Drum Not Spinning
Fixed by these parts
Fixing
How to fix it
Won’t Start
Fixed by these parts
Fixing Fixing
How to fix it
Door latch failure
Fixed by these parts
Fixing
How to fix it
Too hot
Fixed by these parts
Fixing Fixing
How to fix it
Touchpad does not respond
Fixed by these parts
Fixing
How to fix it
Replacing the Drive Belt

Replacing the Drive Belt

Replacing the Drum Bearing Slide - White (Sold individually)

Replacing the Drum Bearing Slide - White (Sold individually)

Replacing the Duct Felt Seal

Replacing the Duct Felt Seal

Replacing the Light Bulb

Replacing the Light Bulb

Replacing the Rear Drum Bearing Kit

Replacing the Rear Drum Bearing Kit

Replacing the Dryer Lint Chute Assembly

Replacing the Dryer Lint Chute Assembly

Replacing the Lint Filter - White Frame

Replacing the Lint Filter - White Frame

Replacing the Door Handle - White

Replacing the Door Handle - White

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Adrian from Middletown, MD
Parts Used:
WE03X29897
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Drum belt broke
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on.
This was a first attempt ever at fixing an appliance and it was no big deal.
184 of 264 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Chad from Gilbert, SC
Parts Used:
WE09X27634, WE14X25080
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
original duct was broken
Dear PartSelect.com,

My repair went off without a hitch.

2 screws removed to remove top.
4 screws removed from inside to remove front panel w/ door.
4 screws removed from top of control panel, loosed and popped top right off.
Flathead screwdriver to pop off old plastic panel.
Removed old wire chas e (plastic, approx 3” long).
Removed built-up lint, wiped down area for new duct.
Snapped new duct on.
Dryer works like new!!
Took about 35 minutes, most of time spent cleaning up inside of dryer from lint due to broken duct.

One problem was that salesperson sold me on a new felt strip to go with new duct. That felt comes already installed on the new duct so I did not need it. Cost me a few extra dollars I did not need to spend.

Other than that, easy ordering, fast shipment, and parts are as close to original as possible.

Thanks for all your help!
Read less
141 of 161 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jim from North Richland Hills, TX
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The dryer door handle broke off.
I pried out the remaining pieces of the handle out of the door with a screwdriver. When the new part arrived, I snapped it into place and it was done. It fit perfectly.
92 of 112 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More