Models > DCCB330EJ3WC

DCCB330EJ3WC General Electric Dryer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for DCCB330EJ3WC

Viewing 6 of 6
BLOWER & DRIVE ASSEMBLY Diagram and Parts List for General Electric Dryer
BLOWER & DRIVE ASSEMBLY
CABINET Diagram and Parts List for General Electric Dryer
CABINET
CONTROL PANEL & COIN BOX ASSEMBLY Diagram and Parts List for General Electric Dryer
CONTROL PANEL & COIN BOX ASSEMBLY
DRUM Diagram and Parts List for General Electric Dryer
DRUM
FRONT PANEL & DOOR Diagram and Parts List for General Electric Dryer
FRONT PANEL & DOOR
TIMER ASSEMBLY Diagram and Parts List for General Electric Dryer
TIMER ASSEMBLY

Manuals & Guides for DCCB330EJ3WC

Click to download
Install
Installation Instructions
(0.81MB)
Manual
Owner's Manuals
(0.72MB)
Keep searches simple, eg. "belt" or "pump".
Drum Bearing Slide - White (Sold individually) – Part Number: WE1M504
$18.58
This single drum bearing slide attaches to the outer-most side of the bearing. This part is also sometimes referred to as a drum slide, drum glide, or drum pad. It provides support to the front of the...
In Stock
Order within the next 54 mins and your part ships today!
Duct Felt Seal – Part Number: WE09X27634
$11.56
This is a duct felt seal for a dryer. The duct felt seal allows the front-load dryer drum to glide smoothly on the front panel. Your dryer will not function properly if the drum felt seal is compromis...
In Stock
Order within the next 54 mins and your part ships today!
Drive Belt – Part Number: WE03X29897
$36.13
This 89.5-inch drive belt is for dryers. It has a 4-rib design on the inside for a better grip. If comparing the size of your current belt to the new one, keep in mind that a small amount of stretchin...
In Stock
Order within the next 54 mins and your part ships today!
Lint Filter - White Frame – Part Number: WE18X25100
$70.13
The lint filter is an important component of your dryer, as it traps lint and other debris from entering the dryer vents, where they can become a fire hazard. If your lint filter has become damaged or...
In Stock
Order within the next 54 mins and your part ships today!
Rear Drum Bearing Kit – Part Number: WE25M40
$88.17
This rear drum bearing kit is a genuine OEM replacement for your dryer. The kit includes a shaft, ground strap, bracket, bearing and seven screws for installation. The bearing supports that back of th...
In Stock
Order within the next 54 mins and your part ships today!
Door Handle - White – Part Number: WE01X20419
$25.14
This part is on the outer door of the dryer.
In Stock
Order within the next 54 mins and your part ships today!
Idler Pulley Wheel – Part Number: WE12X83
$34.79
A dryer's idler pulley wheel serves to help the belt to rotate the drum.
In Stock
Order within the next 54 mins and your part ships today!
Dryer Lint Chute Assembly – Part Number: WE14X25080
$108.72
The lint chute assembly houses the lint filter and channels exhaust air from the drum to the blower wheel.
In Stock
Order within the next 54 mins and your part ships today!
Door Latch – Part Number: WE1M1011
$11.38
This part helps to keep the door closed while the machine is running.
In Stock
Order within the next 54 mins and your part ships today!
Drum Bearing Sleeve – Part Number: WE1M462
$24.20
Sold individually.
In Stock
Order within the next 54 mins and your part ships today!
Door Strike – Part Number: WE1X1192
$8.54
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
In Stock
Order within the next 54 mins and your part ships today!
Retainer O-Ring – Part Number: WE1M461
$9.01
This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r...
In Stock
Order within the next 54 mins and your part ships today!
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for DCCB330EJ3WC

Viewing 6 of 6
Noisy
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door won’t close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Marks left on clothes
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Drum Not Spinning
Fixed by these parts
Fixing
How to fix it
Too hot
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Won’t Start
Fixed by these parts
Fixing
How to fix it
Replacing the Drive Belt

Replacing the Drive Belt

Replacing the Drum Bearing Slide - White (Sold individually)

Replacing the Drum Bearing Slide - White (Sold individually)

Replacing the Duct Felt Seal

Replacing the Duct Felt Seal

Replacing the Rear Drum Bearing Kit

Replacing the Rear Drum Bearing Kit

Replacing the Dryer Lint Chute Assembly

Replacing the Dryer Lint Chute Assembly

Replacing the Lint Filter - White Frame

Replacing the Lint Filter - White Frame

Replacing the Door Handle - White

Replacing the Door Handle - White

Replacing the Drum Bearing Sleeve

Replacing the Drum Bearing Sleeve

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Adrian from Middletown, MD
Parts Used:
WE03X29897
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Drum belt broke
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on.
This was a first attempt ever at fixing an appliance and it was no big deal.
184 of 264 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Chad from Gilbert, SC
Parts Used:
WE09X27634, WE14X25080
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
original duct was broken
Dear PartSelect.com,

My repair went off without a hitch.

2 screws removed to remove top.
4 screws removed from inside to remove front panel w/ door.
4 screws removed from top of control panel, loosed and popped top right off.
Flathead screwdriver to pop off old plastic panel.
Removed old wire chas e (plastic, approx 3” long).
Removed built-up lint, wiped down area for new duct.
Snapped new duct on.
Dryer works like new!!
Took about 35 minutes, most of time spent cleaning up inside of dryer from lint due to broken duct.

One problem was that salesperson sold me on a new felt strip to go with new duct. That felt comes already installed on the new duct so I did not need it. Cost me a few extra dollars I did not need to spend.

Other than that, easy ordering, fast shipment, and parts are as close to original as possible.

Thanks for all your help!
Read less
141 of 161 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jim from North Richland Hills, TX
Parts Used:
WE01X20419
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The dryer door handle broke off.
I pried out the remaining pieces of the handle out of the door with a screwdriver. When the new part arrived, I snapped it into place and it was done. It fit perfectly.
92 of 112 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More