DG4720D1W General Electric Dryer - Parts

The lint filter and frame for your dryer traps unwanted lint and debris so your dryer can effectively dry your clothes. If the old lint filter is cracked or clogged, or the dryer takes too long to dry...

This part is the rear dryer drum bearing only. This part helps keep your dryer running smoothly as possible with as little noise as possible.

The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able...

This front drum slide kit comes with two slides with the apppropriate mounting hardware.

This white idler pulley is used for many clothes dryers. A dryer's idler pulley wheel serves to help the belt to rotate the drum.

This part has three terminals. Note: Use the two smaller terminals for models that only have two wires to the switch.

This wheel attaches to the motor.

This knob accepts a D-shaped shaft.

This dryer drum belt has three ridges. The belt has been updated by the manufacture and is now thinner.