Models > FGR231CAS2

FGR231CAS2 Frigidaire Dryer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for FGR231CAS2

Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
$16.75
The drum belt, also known as a drive belt, is a rubber piece that wraps around the dryer drum, idler pulley, and motor pulley and is used to make the drum rotate. If you can hear the motor running, bu...
In Stock
Order now and your part arrives by Mar 19
The drum support bearing is an authentic OEM replacement part for your dryer. The bearing is used to support the drum and allow it to rotate smoothly and quietly. If your dryer is excessively noisy wh...
In Stock
Order now and your part arrives by Mar 19
Appliance requires 2 .Sold individually.
In Stock
Order now and your part arrives by Mar 19
$51.45
This knob accepts a D-shaped shaft.
In Stock
Order now and your part arrives by Mar 19
Sold individually. This white knob accepts a D-shaped shaft.
In Stock
Order now and your part arrives by Mar 19
This coil ignition kit is used in dryers to open the gas valve when the dryer is on. This kit includes two coils. One is a two-wire secondary coil and the other is a three-wire booster coil. If your d...
In Stock
Order now and your part arrives by Mar 19
This drum bearing bracket is for dryers. Drum bearing bracket holds and supports the drum bearing
In Stock
Order now and your part arrives by Mar 19
$30.85
This white dryer lint filter screen collects lint as it passes through the dryer vent.
In Stock
Order now and your part arrives by Mar 19
This is an adjustable foot for your freezer, refrigerator, and dryer. This part supports your unit by screwing into one of the bottom four corners, and adjusting the height of your machine. If your ap...
In Stock
Order now and your part arrives by Mar 19
Part may differ in color from image. Please note that this is only a cosmetic difference.
In Stock
Order now and your part arrives by Mar 19
$23.05
This screw is designed to fit washers and dryers. Refer to the diagram provided by the manufacturer for further installation instructions and accurate application of screw in your tool.
In Stock
Order now and your part arrives by Mar 19
$51.45
This part is the replacement door handle for your dryer. It is made of white plastic and measures about 2 ½ inches long and 4 inches wide. The door handle allows you to open and close the dryer door. ...
In Stock
Order now and your part arrives by Mar 19

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for FGR231CAS2

Viewing 8 of 8
Noisy
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Marks left on clothes
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Drum Not Spinning
Fixed by these parts
Fixing
How to fix it
Not Heating
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Won’t Start
Fixed by these parts
Fixing
How to fix it
Too hot
Fixed by these parts
Fixing
How to fix it
Touchpad does not respond
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Cheri from Cary, NC
Parts Used:
134011703
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Original timer knob broke
I looked in my appliance paperwork, found the model number, keyed it in, located and ordered the knob. It arrived in a few days and voila, pushed new knob on and dryer is back in great working order. Thanks!
472 of 475 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brett from Monticello, MN
Parts Used:
5303931775
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Dryer would heat initially then cool down
The top of the dryer was easily removed by prying the front up with a screwdriver then tipping it back and off of the mounting brackets. Then the front of the dryer was removed by unscrewing a single screw on each side that held the front to the side panels then pulling the front away from the dryer. Once the front was off, the coils we re easily accessible on the bottom left side. A metal bracket held the coils on and was somewhat tough to get the two screws removed on it as they were stuck, but once they were removed the coils easily came out and I was able to replace them in minutes. The whole job took 15-20 minutes and I now have a dryer that heats through the entire drying cycle.
99 of 112 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Zackary from Fort Collins, CO
Parts Used:
131858004
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
knob broke
pulled old knob off. pushed new knob on.
50 of 65 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!