FER341ZAS1 Frigidaire Dryer

Just slipped them on and ready to go. Ordered them on thur and got em on Tues.

Disconect the dryer from the main power source.

1) Remove the two screws from the rear / upper panel (below the control panel).

2) Snap the front side using a flat head screw driver.

3) On the inside front, remove two screws (one on each side) from the upper side and snap the door assembly off.

... Read more 4) Remove the rear motor access panel (two screws) and appying tension to the spring remove the belt.

5) Pull the drum upwards (verticaly) unnapping it from the rear wall and remove it horizontally through the front panel.

6) Disconect the four leads to the heating element and remove the four screws from the rear of the dryer and replace the heating element.

Follow the same steps backwards to put the dryer together again.

I first disconnected the power by unplugging power cord.

I then removed back cover from control panel using philips screwdriver.

I removed the start switch by twisting it counter clockwise.

I removed the two push on connectors from the start switch.

I installed the two connectors on the new swi ... Read more tch.

I twisted the new switch into place, and installed the new knob.

I reinstalled the back cover plate.

I inserted the power cord back into the receptacle.

I twisted the start knob clockwise.

VOILA!!!!!